Kdl-32bx300

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Mover
    New Member
    • Jul 2016
    • 2
    • Denmark
    #1

    Kdl-32bx300

    Hi all

    Im trying to repair a KDL-32BX300
    Once connected to the wall it starts up by itself shows the Sony logo and shuts down again.
    Red LED error code then apears, it blinks 6 times
    Iv tryed changing the power board but theres no difrence.
    Iv made a small youtube vid where i show the problem.
    https://www.youtube.com/watch?v=FGjl3ZHUh

    Hope you can help
    Regards Mover
    Tags: None
    • Diah
      Badcaps Legend
      • Feb 2013
      • 6344
      • Germany
      #2
      Re: Kdl-32bx300

      for bx300 6 time blinking are backlight error on the Panel inverter.

        Comment

        • ReeceyBurger123
          Never Give Up !
          • May 2014
          • 7325
          • Britain
          #3
          Re: Kdl-32bx300

          Its an inverter sos error meaning the inveter has found a fault and shutdown. Have you images of the set ?
          Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

          https://www.facebook.com/Telford-Tel...7894576335359/

            Comment

            Previous template Next

            Related Topics

            Collapse
            • CptChronic
              Purple Line Enduro Caravan Mover Fault
              by CptChronic
              I have replaced lots of parts on this board to try and get it working. It works for a few minutes then shuts off and does a led flash sequence that shows its not getting the correct voltage (10 flashes of the green led) I turn it on and it works fine, something has a slight hum which gers louder over time. The voltage regulator 78L05 gets hotter than anything else on the board (40C). Then the thing shuts off and won't work again for a while, just constantly does the led flash sequence. I'm guessing something is heating up and it shuts down for protection. I have changed the voltage regulator,...
              05-21-2023, 05:50 PM
            • Kingblue
              Asus G750JX/JW problem with kb lights, USB ports and touchpad / Bios Problem?
              by Kingblue
              Hi im new here and i hope you guys can help me maybe.

              I buyed an old Asus G750JX and the seller told me it was running perfect after shutdown it never bootet again.

              So i buyed this G750JX and open it. after cleaning and checking all inside i startet it.
              It was booting perfectly. i played a clean win 8.1 on it.

              After installing all and update all to the last drivers it was running very good.
              Thinks that dont worked
              Keyboard back lights and cant start with fn+f4 all other fn+f working
              3 of the 4 USB 3 Ports are not working.
              the...
              03-20-2024, 05:31 AM
            • Dani Rahal
              hp omen 17-cb0247ng bios
              by Dani Rahal
              Hi can some one help me plz
              i have hp omen 17-cb0247ng (la h492p) it have bios problems and i flashed bios from usb the new one v53 and its boosting to bios but did not start to windows (blue screen of death) i tryed evry thig and not working
              i flashed bios with programer ( CH341A )and it will not boost to bios just fan working no disply now i flash the orginal bios back its working but no booting to windows same problem
              the bios from hp after extract have 4 bios file same size i tryed 4 of them not working
              i have the orginal bios if some one can see what the problem or...
              05-30-2025, 09:11 AM
            • questore
              NM-C511 not posting after BIOS update
              by questore
              Hi everyone,
              Someone come to me after his lenovo has made a BIOS update and after never posting.
              Board is:
              NM-C511 rev 1.0
              ideapad_s145-15api (Type 81UT)
              S/N: PF1WZ2L8​

              After full removing AC and battery and cmos battery and pressing power button for 30sec the laptop turns on and every LED and power rail comes fine,
              CPU is very mildly warming up but reaction to buttons and no display.
              Tryed to reflash bios suggested on this forum but nothing changed.
              Tryed to reprogram the EC with vertyanov programmer but the following happens....
              05-02-2025, 01:06 PM
            • DavidJocic
              Omen 15-dc1056nf (Need Dump Bios or something ) Thanks :(
              by DavidJocic
              Hello everyone firstly i'm thankfully if someone can help me if not i'm very stupid i have use ch341-a to flash my bios when i was deleted chip and loose my original backup, then the problem comes my laptop won't start only red light blinking without boot and without screen and fans but electricity is there in light close to charger. Chip was not damaged cause via application works when i want to update. Probleme is next i even tryed to download official bios from hp and put there informations of my serials numbers which is : 5CD938GPG1 (with HxD ). My model is with chip name winbond 25Q128JVSQ...
              04-28-2025, 12:54 PM
            • Loading...
            • No more items.
            Working...