Kdl-32bx300

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mover
    New Member
    • Jul 2016
    • 2
    • Denmark

    #1

    Kdl-32bx300

    Hi all

    Im trying to repair a KDL-32BX300
    Once connected to the wall it starts up by itself shows the Sony logo and shuts down again.
    Red LED error code then apears, it blinks 6 times
    Iv tryed changing the power board but theres no difrence.
    Iv made a small youtube vid where i show the problem.
    https://www.youtube.com/watch?v=FGjl3ZHUh

    Hope you can help
    Regards Mover
  • Diah
    Badcaps Legend
    • Feb 2013
    • 6398
    • Germany

    #2
    Re: Kdl-32bx300

    for bx300 6 time blinking are backlight error on the Panel inverter.

    Comment

    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain

      #3
      Re: Kdl-32bx300

      Its an inverter sos error meaning the inveter has found a fault and shutdown. Have you images of the set ?
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

      Comment

      Related Topics

      Collapse

      • CptChronic
        Purple Line Enduro Caravan Mover Fault
        by CptChronic
        I have replaced lots of parts on this board to try and get it working. It works for a few minutes then shuts off and does a led flash sequence that shows its not getting the correct voltage (10 flashes of the green led) I turn it on and it works fine, something has a slight hum which gers louder over time. The voltage regulator 78L05 gets hotter than anything else on the board (40C). Then the thing shuts off and won't work again for a while, just constantly does the led flash sequence. I'm guessing something is heating up and it shuts down for protection. I have changed the voltage regulator,...
        05-21-2023, 05:50 PM
      • Swedishpower
        Dell G3 15 3500 black screen
        by Swedishpower
        Hello
        I have search everywhere for a solution for my problem, but cant find it anywhere.

        When I was away to trow some garbage i always look in the electronic bin.
        and this time i find a laptop.
        Dell G3 15 3500, when I get home i look at the battery, add one harddrive, plug in the powercord.
        the lamp for charmig is white.

        Tryed to start it, the screen blink for a second, the keyboard lightsup, the fans and HD starts.
        but no Dell logo.
        I tryed with a hdmi cable to another screen, still black.
        I started to search solution and tryed...
        07-06-2025, 06:18 AM
      • Kingblue
        Asus G750JX/JW problem with kb lights, USB ports and touchpad / Bios Problem?
        by Kingblue
        Hi im new here and i hope you guys can help me maybe.

        I buyed an old Asus G750JX and the seller told me it was running perfect after shutdown it never bootet again.

        So i buyed this G750JX and open it. after cleaning and checking all inside i startet it.
        It was booting perfectly. i played a clean win 8.1 on it.

        After installing all and update all to the last drivers it was running very good.
        Thinks that dont worked
        Keyboard back lights and cant start with fn+f4 all other fn+f working
        3 of the 4 USB 3 Ports are not working.
        the...
        03-20-2024, 05:31 AM
      • questore
        HP OMEN 15-ce012nh give error code 5long 3 short after CPU LOW SIDE MOSFET BURN
        by questore
        Hello everyone.
        Someone brought this poor hp in.

        All power rails had normal resistances so i turned it on. Instant power cutoff...
        First mosfet was shorted so replaced it...
        After that I have tryed to start since no short was on the main power rail. the CPU middle dual mosfet heated up and protection shut down the laptop.
        After investigating i have found that when the mosftet turning on then the mostfet got instantly hot (not the CPU)
        Removed the faulty mosfet. -> now laptop turns on CPU mildly gets hot but laptop gives the common 5 long 3 short LED...
        Yesterday, 10:09 AM
      • Dani Rahal
        hp omen 17-cb0247ng bios
        by Dani Rahal
        Hi can some one help me plz
        i have hp omen 17-cb0247ng (la h492p) it have bios problems and i flashed bios from usb the new one v53 and its boosting to bios but did not start to windows (blue screen of death) i tryed evry thig and not working
        i flashed bios with programer ( CH341A )and it will not boost to bios just fan working no disply now i flash the orginal bios back its working but no booting to windows same problem
        the bios from hp after extract have 4 bios file same size i tryed 4 of them not working
        i have the orginal bios if some one can see what the problem or...
        05-30-2025, 09:11 AM
      • Loading...
      • No more items.
      Working...