Panasonic remote control

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • LEEDASH
    Badcaps Veteran
    • Dec 2012
    • 481
    • Bedfordshire

    #1

    Panasonic remote control

    Hello group and good evening,but of accident was going to view a DVD and noticed the remote submerged in the flower vase !!!
    Quick as I could disassembled and dried the unit out,no luck,with batteries still in the control the bulb or led infrared is majorly hot ?
    Can anyone help please,
  • Moreno83
    Badcaps Legend
    • Jun 2014
    • 2008
    • The Netherlands

    #2
    Re: Panasonic remote control

    That means something is shorting inside. ( gets hot ).

    You need to clean the remote with alcohol. ( Isopropanol for example ).
    Just scrub the boards with a toothbrush and alcohol and let it dry. ( Use hairdryer ).
    Also need new batteries and then it should work....
    I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

    Comment

    • LEEDASH
      Badcaps Veteran
      • Dec 2012
      • 481
      • Bedfordshire

      #3
      Re: Panasonic remote control

      Ok will try,

      Comment

      Related Topics

      Collapse

      • tmhobadcap
        Pioneer VSX-522-K remote control not working???
        by tmhobadcap
        I have this receiver for at least 10 years. Usually, we just use the remote for turning on/off and adjusting the volume. Recently, the remote control started not able to turn the receiver on. Later, the volume also could not be adjusted by the remote control.

        At first, I thought that it was the usual problem which can be fixed by cleaning the contacts on the switches and the pcb. I opened the remote and clean it with alcohol. The remote did work again after that. But after one day, it did not work again. I opened it again and clean with alcohol and contact cleaner. Again it worked...
        12-24-2020, 01:44 AM
      • Chrissygizmo
        Panasonic tx-40cx400b not responding to remote control
        by Chrissygizmo
        Hi all

        I've just repaired the backlights on this tv. I didn't get a remote with it so I'm using a universal one. The tv works properly via the buttons on the back but the only remote command it registers is the power off. It will power on if I try immediately after switching off, if I leave it until the standby light stops blinking then it won't turn on again from the remote.
        I don't think the remote is at fault as I've got other remotes that do exactly the same thing.
        Any help would be really appreciated....

        Thank you...
        08-29-2021, 09:48 PM
      • piipo
        Old Privileg 5.1 speakers remote control question
        by piipo
        Hi, I have an old Privileg brand 5.1 speakers. I have lost the remote control. I have an universal Harmony remote but there is no Privileg brand in it's software to add. Does anybody have an idea what alternative brand for a remote can I try instead? I'm attaching an image of what the speakers looks like. The image shows 2 main speakers, they are 5 + 1 in total. Thank you very much
        09-18-2024, 01:55 AM
      • hemant_2222
        Schematic for Denon Remote Control RC1156
        by hemant_2222
        Hello Everyone,

        Hope everyone is enjoying their repairs at hand!.

        I am looking forward to get the schematic of Denon remote control RC1156. Actually long time no use of the remote leaked the battery thereby corroding few parts as well as the tracks.

        I was able to join few of them but the remote is still not working, so i am looking forward for your help, in case anyone understand the schematic or the remote circuit diagram and could me assist me in repairing it.

        Please refer to the attached picture, i think the voltage divider is missing...
        10-06-2023, 02:05 AM
      • dfear
        hitachi 75hl16t64u - not responding to remote control
        by dfear
        I have a hitachi 75hl16t64u tv in for repair and it is driving me crazy.
        It came in for a power issue which I have finally resolved by replacing the power supply.

        The current issue is that the TV does not respond to the remote control. I have replaced the IR sensor board with a used one but the fault persists.

        Anyone have a clue how to fix TV?

        FYI: I have checked the remote work s by pointing it at my camera on my phone....
        09-02-2024, 12:15 PM
      • Loading...
      • No more items.
      Working...