Panasonic tc-p42s30

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Malachi
    Badcaps Legend
    • Dec 2015
    • 1077
    • Usa

    #1

    Panasonic tc-p42s30

    Just picked this up today. It has 14 blinks. Service manual only lists up to 13 blinks but I've messed with enough of these panasonics to suspect the SN board (y buffer).
    I leave for vacation tomorrow morning and won't be able to look at it for a week. I'm going to be thinking about it all week. Lol
  • dj01fad
    Senior Member
    • Sep 2014
    • 92
    • romania

    #2
    Re: Panasonic tc-p42s30

    hello...
    14 blinks it the error for IR LED or A board. try to disconnect the remote sensor board, maybe it's not the A board.

    Comment

    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain

      #3
      Re: Panasonic tc-p42s30

      Originally posted by dj01fad
      hello...
      14 blinks it the error for IR LED or A board. try to disconnect the remote sensor board, maybe it's not the A board.
      14 blinks on these is Psu shutdown, doubt the Ir board even causes and error lol
      Last edited by ReeceyBurger123; 07-04-2016, 01:25 PM.
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

      Comment

      • ReeceyBurger123
        Never Give Up !
        • May 2014
        • 7325
        • Britain

        #4
        Re: Panasonic tc-p42s30

        Surprisingly I have the same Tv here (Uk model) has 14 blinks, 4 shorted fets on the SN. Im replacing all 6 30F131 type transistors and all the screws used for the SN board with ones that have ground washers.
        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

        https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • Malachi
          Badcaps Legend
          • Dec 2015
          • 1077
          • Usa

          #5
          Re: Panasonic tc-p42s30

          You know me reecey. I'll be sending it out then.

          Comment

          • dj01fad
            Senior Member
            • Sep 2014
            • 92
            • romania

            #6
            Re: Panasonic tc-p42s30

            this was from the manual;
            I've never had one with SOS14. so... good to know this if it will be the case.
            Attached Files

            Comment

            • ReeceyBurger123
              Never Give Up !
              • May 2014
              • 7325
              • Britain

              #7
              Re: Panasonic tc-p42s30

              Check Maxxarcade on youtube he had the same set 14 blinks was SN
              Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

              https://www.facebook.com/Telford-Tel...7894576335359/

              Comment

              • ReeceyBurger123
                Never Give Up !
                • May 2014
                • 7325
                • Britain

                #8
                Re: Panasonic tc-p42s30

                Originally posted by Malachi
                You know me reecey. I'll be sending it out then.
                Why lol its an easy fix to do, only need an Iron or Hot air haha
                Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                https://www.facebook.com/Telford-Tel...7894576335359/

                Comment

                • Malachi
                  Badcaps Legend
                  • Dec 2015
                  • 1077
                  • Usa

                  #9
                  Re: Panasonic tc-p42s30

                  I purchased a heat gun with multiple settings. I have the iron but if I mess it up most places refuse to work on them if they have been worked on.

                  Comment

                  • ReeceyBurger123
                    Never Give Up !
                    • May 2014
                    • 7325
                    • Britain

                    #10
                    Re: Panasonic tc-p42s30

                    Dont be silly, give it ago if you dont try you wont learn ! How you think I and others got to the places we are. Please just once, the traces are very hard to damage too so you should be fine
                    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                    https://www.facebook.com/Telford-Tel...7894576335359/

                    Comment

                    • Malachi
                      Badcaps Legend
                      • Dec 2015
                      • 1077
                      • Usa

                      #11
                      Re: Panasonic tc-p42s30

                      I did replace the smd capacitor on that Samsung. Doesn't that count?

                      Comment

                      • ReeceyBurger123
                        Never Give Up !
                        • May 2014
                        • 7325
                        • Britain

                        #12
                        Re: Panasonic tc-p42s30

                        Lol good one, but this Tv come on save yourself some $$$
                        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                        https://www.facebook.com/Telford-Tel...7894576335359/

                        Comment

                        Related Topics

                        Collapse

                        • Andre Gilbert
                          Panasonic TC-P55ST50 8 blinks then no blinks
                          by Andre Gilbert
                          Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
                          Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

                          TV Model: Panasonic TC-P55ST50
                          ...
                          11-20-2024, 08:52 PM
                        • Biruslapio
                          Panasonic P58V11B 8 and 12 blinks error "fix"
                          by Biruslapio
                          Bought this TV used not working, panel flashed briefly on power up and it was blinking 8 times, a quick look on SS board revealed a common fault on the 3uF 250V capacitors, C201 to C205 (C1620X in the service manual), the solder joints were all cracked, C201 and C205 pins were darkened and some sparking had occurred on them, C201 was split open and clearly overheated in its last hours, replaced that one and resoldered the others, 8 blinks fixed.

                          Also the previous owner broke the antenna connector by taking the TV out of the wall mount forgetting to unplug it, I desoldered the tuner...
                          04-13-2021, 07:13 AM
                        • jm1234
                          Panasonic plasma TX-P42ST50 - 6 blinks
                          by jm1234
                          Hi,
                          anyone able to provide the service manual for old plasma Panasonic TX-P42ST50E?
                          It turns off almost immediately (0~5 seconds after pressing the on/off button) and starts flashing the red diode 6 times.
                          I disconnected the left-hand side board (SC?, both the ribbon cable and the power cable to it) and also another ribbon going to bottom left board. Then the led signal is 8 flashes. According to service guide to another Panasonic plasma it would mean the left-hand side board is faulty. But I'm not sure it 100% applies to my model.
                          I checked that board for any obvious faults...
                          05-22-2024, 06:59 AM
                        • Alicat
                          Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
                          by Alicat
                          Hello,

                          Stopped by this site trying to fix my parents Panasonic Plasma TV.

                          Model number is TH-50PZ85U

                          Power comes on and the red power light stays on solid.

                          Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

                          I also hear a few clicks.

                          I also think my parents said there was a thunderstorm and the TV failed after that.

                          Section 6 in the service manual talks about power and no screen,...
                          10-30-2024, 10:09 AM
                        • CrewmanRedShirt
                          Looking for assistance troubleshooting a Panasonic TC-P65ZT60 with 3 LED Fast Blinks
                          by CrewmanRedShirt
                          Hello all,
                          As the title states, I followed the troubleshooting guide located here: https://www.manualslib.com/manual/23...page=53#manual, which concluded the 'A' board needs to be replaced. Looking around the net and eBay, I see that there are repair services for the board (TNPH1043UE? Not sure if it is a 'UE' as the suffix grid does not appear marked). What additional troubleshooting can be performed to ensure 1) this board is the problem and 2) since there are repair services, what are they fixing on the board?) I expected 3.3V not to be available anywhere...
                          07-13-2024, 11:02 AM
                        • Loading...
                        • No more items.
                        Working...