panasonic TX-42PX60B screen fault

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • patant
    New Member
    • May 2012
    • 5
    • Scotland
    #1

    panasonic TX-42PX60B screen fault

    Hi everyone hope someone can help me with my faulty plasma tv.

    This tv has three thick lines in the centre of the screen although everything else seems to be o.k.

    When I turn on the tv the standby light flashes maybe 14 times then the tv starts as normal.

    Here is what it looks like.

    Many thanks in advance

    Regards

    Patrick.
    Attached Files
    Tags: None
    • tw2005
      Badcaps Legend
      • Oct 2011
      • 6458
      • Australia
      #2
      Re: panasonic TX-42PX60B screen fault

      don 't they always blink on startup? what colour when it's running, LED green?

      I'm going to say the panel is shot and the driver ICs embedded on the c board ribbons have failed.

        Comment

        • jasonr2000
          Advance Tech
          • Nov 2013
          • 209
          • UK
          #3
          Re: panasonic TX-42PX60B screen fault

          I had this issue and the pdp was shot and is unrepairable

          Best bet would be to replace
          Samsung UE46D6530
          Samsung BD-F7500
          Samsung HT-ES6200

            Comment

            • Alastair E
              Chief Womble
              • Mar 2013
              • 1963
              • U.K.
              #4
              Re: panasonic TX-42PX60B screen fault

              COF chips most probable cause,--Unrepairable
              TELEFIX

              How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
              http://www.irf.com/technical-info/appnotes/an-1088.pdf
              PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

                Comment

                • patant
                  New Member
                  • May 2012
                  • 5
                  • Scotland
                  #5
                  Re: panasonic TX-42PX60B screen fault

                  Thanks for your replies guys.

                  All the best,

                  Patrick.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Ryan.man
                      Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                      by Ryan.man
                      Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                      My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                      This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                      02-04-2025, 12:23 PM
                    • Alicat
                      Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
                      by Alicat
                      Hello,

                      Stopped by this site trying to fix my parents Panasonic Plasma TV.

                      Model number is TH-50PZ85U

                      Power comes on and the red power light stays on solid.

                      Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

                      I also hear a few clicks.

                      I also think my parents said there was a thunderstorm and the TV failed after that.

                      Section 6 in the service manual talks about power and no screen,...
                      10-30-2024, 10:09 AM
                    • Rictech
                      Panasonic SA-MAX770PU SMPSU board fault....
                      by Rictech
                      Hello everyone. 😀

                      As per thread title, this unit has a serious SMPSU fault. It blows F1001, which is a 10A M205 in the phase from the mains input.
                      Very first thing I tried, was simply replacing the fuse, but the replacement ceramic fuse blew immediately.

                      Looking at the schematic for this PSU, I then removed what I thought was the next likely candidate: D1001 - the HV main bridge rectifier.
                      This isolated the fault(no longer blows the main fuse), but does not point me to the actual fault.
                      There are no devices that have exploded or otherwise show signs...
                      08-26-2024, 01:05 AM
                    • smic717394
                      iphone XS turns off when press on screen.
                      by smic717394
                      Hi,

                      I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                      07-25-2024, 10:16 AM
                    • Zelek11
                      Panasonic Plasma screen interference on left half of screen
                      by Zelek11
                      My Panasonic Plasma model P55VT50 has started displaying "interference" on just the left half of the screen only (left when facing the screen). Sometimes it's concentrated in about the first 30 seconds after startup, then disappears. Other times it's fine at startup and then randomly does it later on. When it flashes the interference it's very quick and doesn't stay on the screen unless it flashes repeatedly in a row.



                      This image is a screen shot from a video I took. This is an example of the interference at its worst. Often the interference is much smaller...
                      10-14-2022, 04:54 PM
                    • Loading...
                    • No more items.
                    Working...