Telefunken T32TX182DLBP NO Turn on - Blinking LED

[vinceroger69]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

can you link the video again i can find it

https://www.youtube.com/watch?v=kPCisa9BYkk&t=8s

[nikgegr]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

You need to find the core update file on the internet then reflash that. Guessing you didnt watch all the video as it shows me doing that

can you link the video again i can find it

[dskall]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

I've read several places that say the eeprom data gets corrupted but seldom does the eeprom fail. If that's true then why can freezing get them to work at times.

[vinceroger69]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

i didnt know eeproms had life cycles can we buy ones with longer hours?

[dick_barton]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

So i've heard. It's a pity that the EEPROMs in use are so unreliable supposedly having 100,000hrs plus lifetime.

[vinceroger69]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

Vinceroger69 Is this what you want?

Thanks dick_barton i will give it a try vestel have changed that site reece mentions in his video a lot of firmware they are charging for now ive been told.

[dick_barton]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

Vinceroger69 Is this what you want?

[vinceroger69]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

m8!

The TV works AGAIN! Thanks for the support!



I want to ask you something else:

I got some replacement diodes on Saturday from a local store because i was in a hurry.

Is it OK to replace the 5404 x2 and 1x 5402 with some 5408's? (The shop owner told me that i won't have a problem..he didn't have 5404/5402 available).

Is there anything else to change on the PSU, in order to protect the tv from failing again?

Have you still got a copy of the core update file you could upload please as the vestel site is now charging for the download

[ReeceyBurger123]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

Good stuff

[GeorgeVasil]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

Also one last thing now that you have done the firmware you need to first time install the Tv and turn the backlight down to low if not an Led will burn out in no time flat lol

Yes I have already done that, as mentioned to your video.

[ReeceyBurger123]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

Also one last thing now that you have done the firmware you need to first time install the Tv and turn the backlight down to low if not an Led will burn out in no time flat lol

[ReeceyBurger123]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

m8!

The TV works AGAIN! Thanks for the support!



I want to ask you something else:

I got some replacement diodes on Saturday from a local store because i was in a hurry.

Is it OK to replace the 5404 x2 and 1x 5402 with some 5408's? (The shop owner told me that i won't have a problem..he didn't have 5404/5402 available).

Is there anything else to change on the PSU, in order to protect the tv from failing again?

Awesomeness glad to hear it worked Also yes they will work fine they have a higher current and reverse voltage so they might actually hold out for longer. Also nothing else really to change on these apart from the diodes

[GeorgeVasil]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

Ok mate, the buzz is normally poor standby oscillation when the Led goes on it loads the standby power a little then off it becomes unloaded but because the feedback is poor so you can hear the transformer switching to supply the standby Led when it goes on lol its normal for Vestel sets though. Also you need to hold ok with the Usb with the core update plugged in it will take a few tries to get it going.

m8!

The TV works AGAIN! Thanks for the support!



I want to ask you something else:

I got some replacement diodes on Saturday from a local store because i was in a hurry.

Is it OK to replace the 5404 x2 and 1x 5402 with some 5408's? (The shop owner told me that i won't have a problem..he didn't have 5404/5402 available).

Is there anything else to change on the PSU, in order to protect the tv from failing again?

[Diah]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

i dont care... i just write what i have on mind... buzz sound when he hearing, mean the the first Bit BOOT passed and PWB turn on. second BIT wont start.. as error.. .. this Firmware construction. eeprom, sip. or what ever you call will have only the first 8 BITS of standby boot firmware.. and he had it as hear buzz sound

[ReeceyBurger123]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

buzz sound not related to Firmware. its much at Video Processing section , include LVDS. check or reset LVDS

Nothing to do with the Lvds signal but poor standby power oscillation. You would know that up you read further up. Also dont cry about my reply not offending or slating you just correcting.

[Diah]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

i want to mention, is that i can hear a buzz sound every time

buzz sound not related to Firmware. its much at Video Processing section , include LVDS. check or reset LVDS

[vinceroger69]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

maybe freeze whichever chip it has either a eeprom/spi flash this sometimes makes the set start up ok then add the core update.

[ReeceyBurger123]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

Ok mate, the buzz is normally poor standby oscillation when the Led goes on it loads the standby power a little then off it becomes unloaded but because the feedback is poor so you can hear the transformer switching to supply the standby Led when it goes on lol its normal for Vestel sets though. Also you need to hold ok with the Usb with the core update plugged in it will take a few tries to get it going.

[GeorgeVasil]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

Thanks man! I am struggling to power on the TV again :/

Another thing i want to mention, is that i can hear a buzz sound every time the LED blinks.

I will post again about the results!!

[ReeceyBurger123]

Re: Telefunken T32TX182DLBP NO Turn on - Blinking LED

Link to core update:

http://www.vesteldriver.com/TV_MB82_CORE_UPDATE.html