Anyone know where to find firmware Teac DLE5089FHD?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jwarnes
    Member
    • Feb 2014
    • 29
    • Australia
    #1

    Anyone know where to find firmware Teac DLE5089FHD?

    Looking for where to find firmware for DLE5089FHD teac 50inch tv.
    Stuck in red led standby. Power supply ok.
    Heard somewhere its usually a firmware issue and that i need to put the firmware update file in a usb stick and turn it on and let it update?
    Mainboard number is TTMSD306.69A
    any help GREATLY appreciated.
    Tags: None
    • jwarnes
      Member
      • Feb 2014
      • 29
      • Australia
      #2
      Re: Anyone know where to find firmware Teac DLE5089FHD?

      No one had any experience with this problem before??

        Comment

        Previous template Next

        Related Topics

        Collapse
        • slavetothesound
          HP ProDesk 600 G6 Mini BIOS unlocked - now EC can't find valid firmware
          by slavetothesound
          I Used a T48 and RCUnlocker to remove password from the BIOS on a previously fully functional HP ProDesk 600 G6 Mini. Everything went very smoothly and I was able to boot the machine and install an OS. I then unplugged the machine and put it on the shelf for a week.

          Now when I boot the machine, it does not POST. It plays 5.2 beep codes which are interpreted as:


          I read the firmware with the T48 and it is different than what I flashed to it, so I flashed the unlocked firmware that I had saved. No change. I could use some advice on next steps to take.

          ...
          04-12-2024, 10:05 AM
        • Coldblackice
          GoXLR-Mini.Possible to extract this firmware? Or find its datasheet?
          by Coldblackice
          I'm trying to extract firmware from a GoXLR-Mini

          https://www.tc-helicon.com/product.html?modelCode=P0DI7

          I know it's not ideal, but I'm trying to extract the 64MB firmware without removing the chip. I've done this before, but I realize it's a case-by-case thing. Unfortunately, it seems this board's layout results in it getting powered by my SPI tool (Buspirate), failing extraction.

          I believe the issue is the flash chip's HOLD pin unable to get pulled high, as the current for that pin dissipates elsewhere in the circuit. When I try to pull the HOLD pin...
          02-25-2022, 06:27 AM
        • gurj1979
          Ubiquiti firmware help. US-8-150W POE
          by gurj1979
          Hi guys.

          I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
          Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.

          So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
          Got New chip and writes good.

          THE PROBLEM...
          It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.

          Does anyone have a Good Firmware I can have?...
          07-22-2024, 05:13 PM
        • Vesko356
          [Guide] How to find the right HP bios version to flash
          by Vesko356
          First of all thanks to all of our members who have posted previously all methods posted here.
          Please leave a comment if you find something new,or have anything else to add.
          -----------------------------------------------------------------------------------------

          Find by serial number,model number or series

          If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
          Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
          Operating system and OS version.If...
          08-11-2023, 03:27 AM
        • macabook
          🛠️ MSI GP75 Leopard MS-17E71 – No Display, Deep BIOS/EC Troubleshooting
          by macabook
          Hello everyone,

          I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
          🧩 Initial Issue
          • Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
          • External display (HDMI) shows
          ...
          07-24-2025, 02:17 PM
        • Loading...
        • No more items.
        Working...