LG LVDS FFC continuity

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • t4796
    Senior Member
    • Feb 2015
    • 79
    • Australia

    #1

    LG LVDS FFC continuity

    I've got an LG LA6230 with back light, audio but no video. I've tried another t-con same result.

    Thought I'd check the lvds cable and I find some pins have no continuity. Is this normal?
    Last edited by t4796; 12-20-2015, 07:00 AM.
  • t4796
    Senior Member
    • Feb 2015
    • 79
    • Australia

    #2
    Re: LG LVDS FFC continuity

    The cable
    Attached Files

    Comment

    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain

      #3
      Re: LG LVDS FFC continuity

      Yes its normal some of the pins are ground.
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

      Comment

      • ReeceyBurger123
        Never Give Up !
        • May 2014
        • 7325
        • Britain

        #4
        Re: LG LVDS FFC continuity

        Hmm, have you checked what voltage is on the other side of the Fuse on the Tcon ?
        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

        https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • t4796
          Senior Member
          • Feb 2015
          • 79
          • Australia

          #5
          Re: LG LVDS FFC continuity

          I thought that the pins should go straight through to either end of the plug?

          I've got ~12v at the fuse. I found one of my Sony lvds cables was the same size and tried it with the same result unfortunately. I think the mainboard is at fault. I seem to read a lot of threads where LG mainboard have gone faulty. Wish I knew what component. Saw some people replace eeproms.

          Comment

          Related Topics

          Collapse

          • Tjaytony
            Microsoft surface book 2 Lvds pins
            by Tjaytony
            Hello everyone. So I have this surface book 2. The dock doesn't charge the screen side. And it doesn't detect the the gpu. I dissambled it. Realized a capacitor beside the gpu is shorted. Changed it, now it detects gpu.

            On the lvds connector. There are burnt/corroded pins. I will post pictures for better descriptions and to ask my question better.

            Since it's detecting gpu now. I will only be talking about the lvds issue.
            07-12-2023, 11:04 AM
          • Instafixx
            Macbook A2179 820-01958
            by Instafixx
            Hi,
            Have a Macbook A2179 with liquid damage. Customer showed it some shop which has done an ultrasonic cleaning of the board.
            The board pulls 0V but doesnt turn on. No Fan SPIN. NOT IN DFU.

            I checked the Power Sequences below and found this -


            Once a valid external power source (Charger or battery) is connected, the following rails will come online.
            PPBUS_G3H: Normal voltage is ~12.6v on the charger with the battery disconnected. Produced from the ISL9240 (U7000, which uses PPDCIN_G3H as its VIN.
            PP3v3_G3H_RTC: Normal voltage is ~3.3v. Produced...
            05-20-2023, 05:19 AM
          • Tarot Superstars
            trying to fix a 6V 0.5A T1 (Transformer) AD050120T2 power supply
            by Tarot Superstars

            Hi. I am trying to fix a 6V 5A power supply that would was used a lot.
            I want to fix it partly for learning, and part because I don't want to buy a new one.

            It has distinctive smell of burning but not seen obvious burned components yet. I'm not sure where the fuse is.
            I tested the only slightly bulged capactitor (out of circuit) and it measured normal capacitance and ESR.
            Everything else was tested in circuit with a multimeter.

            In circuit tests
            I tested the large diodes underside and they seem fine.

            I tested...
            08-14-2023, 12:45 PM
          • triplefour
            LG 75UN8570AUD panel issue fixed with tape.
            by triplefour
            I've been seeing a lot of the new TVs (samsung and LG only i think) maybe 1-2 years old suffering from sudden panel death and have been over 50% successful bringing them at least most of the way back to functionality if not all the way, with the tape masking of the LVDS pins method.
            add this one to the list. the issue was on the left side of the panel and i ended up blocking just 3 pins on the connector that joins the two panel boards that make up the left side of the panel (it has 4 boards total) i didnt get the picture back to 100% perfect. i spent hours fiddling with which pins to block...
            07-17-2023, 10:22 PM
          • mon2
            A1466 Macbook Air (Liquid damage repair)
            by mon2
            Hi. Recently serviced a damaged A1466 Macbook Air. Thought to post the issues and resolution for each.

            Macbook AIR Model A1466 Diagnostic 09-01-2021

            Issue: Liquid damaged (beer spill) Macbook AIR will not power up.


            Problems & Resolutions

            1) Attached Apple magsafe power adapter. No green / no orange light. This confirms the absence of the PP3V42_G3H voltage rail. The PP3V42_G3H rail is the primary voltage rail necessary to communicate with the magsafe power adapter to report the green or orange light status to the end user....
            09-01-2021, 09:31 AM
          • Loading...
          • No more items.
          Working...