Philips 50" Backlight issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CraigR
    Badcaps Veteran
    • Dec 2013
    • 973
    • USA
    #1

    Philips 50" Backlight issue

    Philips 50PFL3807/F7 When turned on with a flashlight I can see the "Philips" logo then a click and it goes off no backlight what so ever not even a flash. It looks like the inverter board might be built in to the power board?? and at the connector for the lights I only get 4.9v at 2 of the wires and nothing on all the rest and that is only before it clicks off again.
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • ovrax
      Philips 55PUS6804/12 turn on & off (probably backlight issue)
      by ovrax
      Hello everyone,

      First of all, please excuse me as I'm quite new to this field.

      I have a Philips 55PUS6804/12 TV. It turns on and off instantly (backlight flash). I personally think it's a backlight issue (faulty LEDs). Could you help me confirm my diagnosis?

      I've checked and the T-CON seems to be fine. I disconnected one ribbon cable at a time at the bottom, but the problem persists.
      The Ambilight works perfectly and stays on.

      No sounds.

      Thanks in advance.
      5 Photos
      08-25-2024, 04:33 AM
    • Cornito
      Thomson 50UD6306 (TCL) Backlight Issue, starts then stops, led changed
      by Cornito
      Hello Team,

      I'm back with another backlight issue that I thought was simple, but it turned out to be more complex than expected.

      Let me provide a brief history: The TV was working well, then one day, the backlight started and shut down. I thought I had an LED issue leading to this behavior, so I replaced the LEDs with brand new ones. However, the issue remains the same.

      Next, I replaced the electrolytic capacitors attached to the LED power supply, but the results were the same. I then replaced the driver, a OB3365RP, and did it twice due to the same result....
      08-08-2024, 08:09 AM
    • cheebster
      iPad Pro 12.9 5th Gen Backlight Issue
      by cheebster
      Hello, got an iPad Pro A2378 12.9 5th gen with no backlight. Got another test unit without screen, tested the screen, still no backlight with the test unit.
      Figured out the backlight on the screen was bad, ordred a new backlight from mobilesentrix, *carefully replaced it* without damaging the lcd, oh well.
      Final result, issue is still there, the screen has no back lights. So i'm back to square one, with 3 hours less and 100$ out, issue still on the screen.
      The panel is still ok, i can see the apple in the middle of the screen when it kicks in, just no backlight.
      Anyone...
      05-20-2025, 09:17 AM
    • DoOm86
      philips 55pft5500/12 Backlight issue. What am I doing wrong?
      by DoOm86
      TV philips 55'' no backlight (image ok).
      I tested the backlight with my led tester from the unplugged connector cable and it lights up. I had voltages at the motherboard connector, but anyway I order a new psu. Same problem, same voltages. Disassembled the TV and checked every strip with my led tester, they all light up, same voltage for every pair of strip (they go two by two).
      What am I missing?

      And something else I don't understand. I checked and I have 3v Leds, 10 per strips. Why every pair of strip (so 20 Led) take about 32v when powered up with my led tester 🤔
      2 Photos
      04-16-2024, 03:47 PM
    • Acnologia
      Lenovo Thinkpad T540P - Showing at 14" inch but NOT at 15.6" inch (Backlight issue) ?
      by Acnologia
      Hello to all members of badcaps.

      Another brainstorming that i have been messing with for months as a side project.
      Bought a T540p , from eBay as 'doesn't display' ,so i thought it was either backlight fuse, or screen issue etc.

      I got it in my hands, first thing, the machine works fine boots to windows , in external screen all diagnostic are good.
      Step 1.
      Change screen (FAT - LED ) 1366x768 to 2nd one, that i know 1000% that is working ,as it has been tested.
      Machine > Doesn't give display it's really dim.
      Step 2.
      Use the same...
      11-05-2025, 04:02 AM
    • Loading...
    • No more items.
    Working...