TNPA5623 Screws Arcing Issue

[tech2014]

I lost the screws that came with the kit. Does it matter what screw is used, as long as there are washers.

[freakaftr8]

Re: TNPA5623 Screws Arcing Issue

I would use some good quality screws that are stainless and have lock washers but not the kind that will mar the board, the lock washers have to be underneath the standard washer and the screws that go to the SC board to the buffers cannot be longer than the end of the board if they go too far they arc against the back side of the panel

[CapLeaker]

Re: TNPA5623 Screws Arcing Issue

or take screws out of a junk board...

[tech2014]

Re: TNPA5623 Screws Arcing Issue

To be safe I ordered some screws from SJ. Thanks guys.

[tw2005]

Re: TNPA5623 Screws Arcing Issue

To be safe I ordered some screws from SJ. Thanks guys.

you know now that you've done that you're going to find the old ones

[tech2014]

Re: TNPA5623 Screws Arcing Issue

oh well its was like $16 total no biggie. Funny thing is I got another panasonic tv today with the same issue. This one is a TNPA5623AB board. I am curious if it is swappable with the TNPA5623.

[tw2005]

Re: TNPA5623 Screws Arcing Issue

oh well its was like $16 total no biggie. Funny thing is I got another panasonic tv today with the same issue. This one is a TNPA5623AB board. I am curious if it is swappable with the TNPA5623.

more than likely it would work but generally they're matched to the panel. We know the drivers are different. The connectors line up so would fit