Viewsonic n4785p tcon problem?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bleachedrock
    New Member
    • Jan 2013
    • 3
    • USA
    #1

    Viewsonic n4785p tcon problem?

    Hi Guys, I have an old Viewsonic n4785P (aka VS12070-1M) LCD TV built January 2008. It's huge (thick) and doubles as a space heater but it has a nice bright picture and works well as a bedroom TV.

    I believe the Tcon board is toast (see https://youtu.be/_fgAEG3_R6k) and I wanted to know how specific of a replacement board do I need to get? For example:

    The existing tcon board is a popular V420H1-C07 board that has 3 inductors (some have only 2). The V420H1-C07 is printed on the board.

    There is also a sticker along the edge of the board with:
    M$35-D020223-L$TSR747400020

    I can find many V420H1-C07 boards with 3 inducers pulled from other manufacturers with matching IC numbers as my existing board.

    I can also find some V420H1-C07 boards with 3 inducers AND also have a matching M$35-D020223 part of the sticker AND matching IC numbers.

    I can not find full V420H1-C07 boards with a full matching sticker.

    Do I need to find a full match of board V420H1-C07, 3 inducer version, with matching IC's AND sticker or would any old V420H1-C07 with 3 inducers work?

    The only reason I'm waffleing on this is because some boards are ~ $17 and others ~$45 some are locally available in the USA and others are in China.

    Anyone familiar with older Tcon boards enough to give me a couple of tips?

    Thanks.

    BR-DC
    Attached Files
    Last edited by bleachedrock; 12-01-2015, 01:17 PM. Reason: adding tcon pic
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • x_orange90_x
      TCL 50S535 bad tcon or panel issue?
      by x_orange90_x
      Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
      03-29-2025, 11:02 PM
    • advant
      Driving a Sharp TCON/panel with a universal main board
      by advant
      This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

      I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
      02-03-2020, 12:25 AM
    • Hakuu
      LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
      by Hakuu
      Hi There,

      This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

      After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

      More Details

      TV Model - LG OLED77G1PUA

      Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
      07-12-2023, 02:37 PM
    • netgearnetgear
      TCL 43S423 TCON OR PANEL FAULTY???
      by netgearnetgear
      Good day, I have a TCL TV: Model 43s423. After turning ON the TV, the ROKU TV logo appears with fine lines over the whole screen, then after a while there are vertical bands in the middle of the screen top to bottom and the TV tries to update its firmware but I do not have the remote to connect it to my new network connection. Also the Power ON light blinks 2 times in quick succession. When I remove the ribbon on the right of the tcon board the left side of the screen shows but with fine lines. If I remove the left side ribbon and connect the right side ribbon the whole screen is blank with...
      Yesterday, 06:04 PM
    • Daren87
      Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help Needed🙏
      by Daren87
      Hello everyone,

      I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
      08-13-2023, 03:25 PM
    • Loading...
    • No more items.
    Working...