Lg 42l641v

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • riget
    Senior Member
    • Sep 2011
    • 66
    • UK
    #1

    Lg 42l641v

    Got this LG tv, no picture or backlights, check volts and get 24v ok, but blon only .01v, so suspect mainboard, can these be swapped out ok?
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • riget
      Senior Member
      • Sep 2011
      • 66
      • UK
      #2
      Re: Lg 42l641v

      Found a burnt ic, think it's to the hdmi circuit, all working fine again now.

        Comment

        • Hamie
          Badcaps Legend
          • Apr 2014
          • 1383
          • UK
          #3
          Re: Lg 42l641v

          That's not much help to anyone else??
          Did you replace the IC?
          What's the IC number/part etc.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • u666sa
              HP Envy x360 13-bf0013dx (i7, 8gb) ipa32 la-m024p rev 1b short near PJ1802, type-c not switching to 19 volts
              by u666sa
              Laptop is HP Envy x360 13-bf0013dx, hp website link, it's an i7-1250U with 8 gig onboard ram.
              Platform: ipa32 la-m024p rev 1b



              Originally you'd plug power supply into it and it would take up to 1.2 amps and then drop to 200 milliamps and then go back up again to 1.2, staying all the while at 5 volts. Pressing power button would results in power LED blinking amber 3 times. 3.3 volt rail, 5.1 volt rail present, main power rail 8.8 volts. Power button test pads near EC chip 2.7 volts.

              I found a short on the other side:



              ...
              10-04-2025, 05:03 PM
            • triplefour
              TCL 75S421 has sound but no backlight not even a flash
              by triplefour
              TCL 75S421
              PSU BOARD: 40-L402H8-PWD1CG
              it shows not even a flash of backlight when powering up.
              but the tv appeas to turn on and i can hear the sound of the menus moving and clicking. i can power down the tv with the button.
              testing the backlights with my tester all 4 strings lit up and showed similar voltage drops. around 110 or so.
              unplug mb and leave only psu plugged into backlights (PSU + BL SELF TEST MODE?) does not light the backlights.
              i do see 24v but 0v on PSON and BLON (i didnt write this down tho so cant be sure)
              with mb connected, PSON...
              11-17-2023, 09:54 PM
            • supermattch
              HP 15dy-2021nr wont power on mystery volts
              by supermattch
              Hi everyone.

              I am diagnosing my personal laptop, because it wont power on and no leds light up.

              At the dc-in there are 8 pins, 1 and 2 shows healthy 19.66 volts. The next three are ground, but the 6th one shows .283 volts. This is strange to me, it should be 3.3 or 5 or aome volts not 0.283v. As I am new to this, I would like some guidance. Please someone advise me on what to check next.

              Oh the boardview and schematics I am using is for a similar model as I cannot find the proper one anywhere. Quanta DA0P5HMB8F1 rev F. Nowhere on the internet.
              09-23-2025, 12:13 PM
            • MisterAIL
              PS5 digital / No Power / No Beep / Good power supply
              by MisterAIL
              Hi everyone,

              Brought a non functionnal PS5. Apparently only a bad PSU...
              No beep, nothing.

              After some tests i found this :
              - PSU is fine (12 volts stable)
              - 12 volts line is shorted
              - DA9065 was fried, F7003 also => Replaced both of them, short is gone on 12 volts line, no dead short anywhere else.
              - By the way, nothing change. No signal, no power, no beep.

              Mesuring all rails with my workbench psu (12 volts input)
              - 0.00 amp drawing
              - 12 volts, 5 volts, 2 volts, 1,15 volts are presents (suppose new DA9065 do is...
              3.3v PMIC
              5 Photos
              03-12-2024, 03:24 PM
            • max789
              Samsung UE48H6410 replaced Mainboard but backlights doesnt go on
              by max789
              Hello, I have a problem with my Samsung UE48H6410SSXZG with the main board BN41-02156A and the power board BN44-00709A. Everything seemed like this, the TV could no longer be switched on, the standby LED always flashed 5x2 times. Backlight was off and no sound from TV. Also made the flashlight test and there was no picture.

              I made the following tests:
              1. Disconnected the main board from Power Board = backlight works.
              2. Connected the main board and disconnected the T-Con = backlights does not work.

              So I ordered a main board from Ebay also BN41-02156A but from...
              01-18-2024, 06:56 AM
            • Loading...
            • No more items.
            Working...