LG LCD picture problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • luchey
    New Member
    • Nov 2015
    • 3
    • United States

    #1

    LG LCD picture problems

    Hey guys,

    I have a 55 inch LCD tv. It's a 55LH40. When both ribbon wires are connected to the t con board only the top part of the screen is visible. But if I disconnect the left one, only the right half of the screen shows but it's perfectly clear. The same goes for the right side. Why are they ok separately but together they ruin the picture?
    Thanks!
  • luchey
    New Member
    • Nov 2015
    • 3
    • United States

    #2
    Re: LG LCD picture problems

    Bump sorry I forgot to put model in title. Don't know how to edit it.

    Comment

    • Andrew F. Ali
      Badcaps Legend
      • Jan 2014
      • 2450
      • Trinidad & Tobago

      #3
      Re: LG LCD picture problems

      Replace the T-CON board is what I would try first.

      Comment

      Related Topics

      Collapse

      • jean luc ferre
        laptop hp g72 b52sf screen problems
        by jean luc ferre
        Hello,
        on this laptop hp g72 b52sf i have screen problems as you can see with the photo joined in attachments.
        the used graphic card is "intel hd graphics" and the id of the integrated screen is : "monitor/SEC3354".
        i verified the driver of the péripherals and they are ok. i verified the definition and settings of the graphic card and of the screen : definition 1600x900 and refreshment frequency :60hz. (they are the sames for the graphic card and the screen).
        i don't understand the reasons of the white stripe at the bottom of the screen below the task...
        06-07-2025, 03:27 PM
      • Mgiffune
        Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
        by Mgiffune
        I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

        I ordered a supposedly ‘new' Tcon board this time, and
        ...
        06-09-2024, 10:28 AM
      • Ryan.man
        Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
        by Ryan.man
        Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

        My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

        This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
        02-04-2025, 12:23 PM
      • arbitarytwist
        Samsung UN50NU7400 - No Picture (but boot screen and screensaver)
        by arbitarytwist
        Have a Samsung UN50NU7400 which shows a boot screen and a screen saver if left on long enough but no picture ?

        Would a moving screen saver confirm that the panel is ok or it could still be a panel issue ?
        03-01-2025, 01:16 PM
      • nasdaa
        Packard Bell Kayfo, no picture on screen.
        by nasdaa
        Hello, I need your help for a failure on a laptop:

        It's a Packard Bell Kayf0, motherboard LA-5021P, Rev 1.0 with graphic issue.

        I received this pc because it was turning on but not displaying anything, the fans are running normally and all chipsets heat up on startup but no picture on screen, no backlight either. I noticed that ENAVDD and ENVDD are not present and that there is no LCDVDD on the connector. I didn't check the screen because, maybe I'm wrong, but if there aren't these signals, even if the screen is good, it can't display anything? I tried heating the...
        06-20-2023, 01:27 AM
      • Loading...
      • No more items.
      Working...