Hi. Does anyone know what the latest firmware for this tv is? and where i can get it.
tia
tia
-
-
-
Re: Panasonic tx-p50g10b
Thanks for the link. Is that firmware compatible with the tx-p50g10b?
As i know TC version is the american version of the TX.Comment
-
Re: Panasonic tx-p50g10b
Probably will not work. European versions have that big connector. Not too sure what its called but we don't have it here in the states.Did I leave the soldering iron on?Comment
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic tx-p50g10b
Haha yep that's the one. I worked on at TV here in the states that had that start connector. Is a few years back and I really wish I remember the brand it was some cheap off brand but oddly it operated on 120 volts ac. But I'm pretty sure the power supply was a dual switching 120 - 220 autoDid I leave the soldering iron on?Comment
-
I have a Panasonc/vestel 55" 4K HDR TV and I need A copy of the Firmware.
I replaced the main board and someone gave me a 43" FINLUX firmware as it is a Panasonic Vestel version, it got the TV working again but the PIP will not work, I can only assume that it's because the Firmware thinks it is 43" tv?
I was greatfull for the TV to be workng again and it's been okay, but now I want to get it set up correctly.
If anyone has a copy of the firmware I need PLEASE help me out and send me A copy.
Greatfull for any help.
...01-11-2022, 07:44 PM -
In 2022 SONY did "Termination of TV Software Update" for this model.
I did find older firmware but it can't be installed over newer one (rolled back)
Yes, got boot loop during android load so if that will not work then EMMC has to be replaced, I think.
-
Hello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...02-10-2024, 02:07 PM -
Hi guys.
I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.
So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
Got New chip and writes good.
THE PROBLEM...
It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.
Does anyone have a Good Firmware I can have?... -
Hello friends,
I need the latest firmware for Synology DS109.
The filename is DSM_DS109_3259.pat (about 170MB).
Umpossible to download from Synology, because their support for old devices is discontinued as of 2023-05-31.
Please does anybody have a backup?
Many thanks in advance.
Comment