TX-P50G10B Fault

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Emu9x
    Member
    • Sep 2015
    • 12
    • UK
    #1

    TX-P50G10B Fault

    Hi. Does anyone know what the fault is with my tv?
    I have linked a youtube video showing lines appearing and disappearing on the left hand side!
    https://www.youtube.com/watch?v=P4AiHbJl9tg
    I've done some research and i believe it to be the C3 buffer board, can anyone confirm! and if so, is it dry joints on the capacitors or a total board replacement?
    tia.
    Last edited by Emu9x; 09-30-2015, 01:11 PM.
    Tags: None
    • Emu9x
      Member
      • Sep 2015
      • 12
      • UK
      #2
      Re: TX-P50G10B Fault

      bump

        Comment

        • ReeceyBurger123
          Never Give Up !
          • May 2014
          • 7325
          • Britain
          #3
          Re: TX-P50G10B Fault

          Reseat panel ribbon cables and try tv I had a similar fault on a Vt20 was just ribbon cables going to screen.
          Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

          https://www.facebook.com/Telford-Tel...7894576335359/

            Comment

            • Emu9x
              Member
              • Sep 2015
              • 12
              • UK
              #4
              Re: TX-P50G10B Fault

              Thanks. Will try that! if that doesn't cure the fault any idea which panel will be at fault?

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK
                  #5
                  Re: TX-P50G10B Fault

                  A-board, most likely.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    • ReeceyBurger123
                      Never Give Up !
                      • May 2014
                      • 7325
                      • Britain
                      #6
                      Re: TX-P50G10B Fault

                      I agree with Tom it will either be A board aka mainboard at fault.
                      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                      https://www.facebook.com/Telford-Tel...7894576335359/

                        Comment

                        • Emu9x
                          Member
                          • Sep 2015
                          • 12
                          • UK
                          #7
                          Re: TX-P50G10B Fault

                          Thanks you for the help guys.
                          Greatly appreciated.

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • Rictech
                              Panasonic SA-MAX770PU SMPSU board fault....
                              by Rictech
                              Hello everyone. 😀

                              As per thread title, this unit has a serious SMPSU fault. It blows F1001, which is a 10A M205 in the phase from the mains input.
                              Very first thing I tried, was simply replacing the fuse, but the replacement ceramic fuse blew immediately.

                              Looking at the schematic for this PSU, I then removed what I thought was the next likely candidate: D1001 - the HV main bridge rectifier.
                              This isolated the fault(no longer blows the main fuse), but does not point me to the actual fault.
                              There are no devices that have exploded or otherwise show signs...
                              08-26-2024, 01:05 AM
                            • sam_sam_sam
                              ESR meter came to the rescue again today with a PLC I/O card fault
                              by sam_sam_sam
                              I have been having a fun time at work with two pieces of equipment that had shorted components or shorted component cables to machine frame
                              I would check what my multi meter was telling me about how many ohms I getting with the multi meter was telling versus the ESR was telling me about weather or not it really was a short to machine ground or not

                              One note at first we thought that it might be a bad I/O card or a malfunction PLC including me as well but I thought I would try and see if removing the I/O cables would make a difference or not and this time it did make a difference...
                              12-18-2023, 08:17 PM
                            • cazi1001
                              Strange fault on Lenovo ThinkPad E14 Gen. 2
                              by cazi1001
                              Hello,
                              I have a strange fault with a Lenovo ThinkPad E14 G2 (Board No. NM-D011 Rev. 1.0).

                              The first Problem, which I fixed already, was a dead TPS65944AD (USB Type-C) controller. After I fixed this fault, all functions working fine and the notebook run very well with the charger and battery.
                              On the next day, I tied to start the notebook with the battery, but nothing happened. I started with the charger and on windows, I saw, that the battery was empty. And this was nearly impossible, because the battery was charged. I disconnected the battery and found out, that the board...
                              03-24-2024, 04:16 AM
                            • PanicMechanic
                              Extech EX330 multimeter current range offset fault
                              by PanicMechanic
                              My multimeter has developed this fault, a few months ago. I tried to fix it, but had no success.

                              The fault is that on the current ranges it never shows 0. Does not matter if the probes are open or shorted.
                              As you can see from the pics, the offser is the same (just multiplied for other rages):

                              -4.9 uA
                              -0.49 mA
                              -0.49 A

                              I don't know what exactlly caused the fault.

                              The meter had a battery leak before I noticed the fault, but I am not sure if the fault was present before that happened. I just did not noticed. The battery leaked...
                              05-11-2021, 11:13 PM
                            • spleenharvester
                              Cordless Dremel 8220 rotary tool power fault
                              by spleenharvester
                              Hi all

                              I bought this Dremel several years ago (8220 + 880 2.0Ah battery). After about a dozen light uses it developed a power fault. I asked Toolstation to start a warranty claim for me and they just refunded me in full without asking for it back instead. Would be nice to fix it instead of consigning to the dustbin.

                              It is complete luck of the drawer whether it powers on or not. Sometimes it will be completely dead, no lights no response. Switching power on and off repeatedly and/or removing and reinserting the battery will eventually make it spring to life. After that...
                              04-13-2025, 02:10 PM
                            • Loading...
                            • No more items.
                            Working...