Schematic for Samsung BN94-04357A Main board anyone?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jcamerox
    Member
    • May 2015
    • 34
    • Canada
    #1

    Schematic for Samsung BN94-04357A Main board anyone?

    Hi,

    The board is from a Samsung UN55D6500VFXZC led tv. The power supply seems okay because the backlights come on with the main cable disconnected and then with the main connected, the power cycles on and off, relay clicking every 5 seconds. No audio or video. I was able to find a service manual but all it has is block diagrams and cable connectors. Need the electrical schematic for the main board. Thanks.
    Tags: None
    • Hamie
      Badcaps Legend
      • Apr 2014
      • 1383
      • UK
      #2
      Re: Schematic for Samsung BN94-04357A Main board anyone?

      As far as I'm aware Samsung don't release schematics for main boards.

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK
          #3
          Re: Schematic for Samsung BN94-04357A Main board anyone?

          Not for ones this new, certainly. They did for some older models.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • jcamerox
              Member
              • May 2015
              • 34
              • Canada
              #4
              Re: Schematic for Samsung BN94-04357A Main board anyone?

              Thanks for the replies Hamie and tom66. I will stop trying to find one and concentrate on getting a replacement board. I was trying to find out why there was no power going to one of the on board voltage regulators, one of the few components I might try to replace on a main board.

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK
                  #5
                  Re: Schematic for Samsung BN94-04357A Main board anyone?

                  Is the power supply outputting 5V & 13V?
                  Check PS ON signal - if not LOW or changing when turned on, can be main board fault.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Asraf Atb
                      Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
                      by Asraf Atb
                      Hi everyone,

                      Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

                      Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

                      I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
                      1 Photo
                      01-27-2025, 05:02 PM
                    • Dani_2024
                      Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                      by Dani_2024
                      Hi and thanks in advance for any input you might provide!
                      I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                      Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                      Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                      5 Photos
                      10-28-2024, 05:06 PM
                    • ygorsan
                      LG 55NANO77SRA TV ā€“ Menu scrolling by itself even after removing button board (Main Board EBU66792103)
                      by ygorsan
                      Hi everyone,




                      Iā€™m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







                      šŸ§© Problem Summary:
                      • The TV keeps scrolling through the menu or selecting items by itself.
                      • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
                      • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
                      • I
                      ...
                      Today, 08:34 AM
                    • Lee M.
                      Samsung UN75RU8000FXZA bad main board?
                      by Lee M.
                      When plugged in it will click and cycle the BL on and off, no pic and does not respond to remote. When I disconnect the cable from the PS board to the main board and then plug it in the BL will come on and stay on. There are only two boards in this set, the LVDS cables from the panel driver boards connect directly to the main board. Since the BL comes on and stays on I'm thinking the PS board is ok and the problem is on the main board. Should I order another main board or do I need to do more testing? thanks, Lee
                      11-08-2023, 07:46 PM
                    • jb_Bak
                      Sony xbr-65x900c main board issues?
                      by jb_Bak
                      Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                      Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                      Power Board Connector that goes to Main board
                      CN6401
                      Pin 01 NC
                      Pin 02 NC
                      Pin 03 "BL_ON": 0V
                      Pin 04 "N/C"
                      Pin 05 "STBY 3.3V": 3.5V
                      Pin 06 "GND": N/C
                      Pin 07 "AC_OFF"...
                      09-27-2021, 04:52 PM
                    • Loading...
                    • No more items.
                    Working...