Panasonic (TC-P55ST30) No power

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tram704
    Member
    • Aug 2015
    • 12
    • US

    #1

    Panasonic (TC-P55ST30) No power

    I have a Panasonic TC-P55ST30 that will not power on. I have no Flashing LED lights. Actually, I have no LED lights at all. I tried the unplug, hold power 10sec, then plug in again. No change. Removed back cover, No boards where grounded to case. Also, I have 120v entering main board. This is where I stopped. Any help on further troubleshooting would be appreciated.

    Thanks
  • Andrew F. Ali
    Badcaps Legend
    • Jan 2014
    • 2450
    • Trinidad & Tobago

    #2
    Re: Panasonic (TC-P55ST30) No power

    Please post pics of the TV with the back cover removed and close up Hi-Def pics of the PSU board and connectors.

    Comment

    • tram704
      Member
      • Aug 2015
      • 12
      • US

      #3
      Re: Panasonic (TC-P55ST30) No power

      Not sure if this is what you were looking for but here are some pics. If not let me know and I will get some more. Thanks
      Attached Files

      Comment

      • tw2005
        Badcaps Legend
        • Oct 2011
        • 6458
        • Australia

        #4
        Re: Panasonic (TC-P55ST30) No power

        follow the guide, but I'd determine if 5Vstb is present, if so A board would be a suspect. SC boards can go short and cause 14 blink or locked solid LED. Should not affect 5Vstdby line though. the A board turns the front led on.
        Attached Files

        Comment

        • tram704
          Member
          • Aug 2015
          • 12
          • US

          #5
          Re: Panasonic (TC-P55ST30) No power

          Should I read 5vac or 5vdc? Sorry, for junior league question. I do have 5v dc. I moved to next step which was to disconnect a1 on a board and listen for relay click. Did this no click. Therefore replace a board. Just want to make sure about the ac/dc reading.

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #6
            Re: Panasonic (TC-P55ST30) No power

            It will be DC, everything on the power supply outputs is always DC.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • tram704
              Member
              • Aug 2015
              • 12
              • US

              #7
              Re: Panasonic (TC-P55ST30) No power

              Thanks guys. Ordered board will let you know! Thanks again

              Comment

              • tram704
                Member
                • Aug 2015
                • 12
                • US

                #8
                Re: Panasonic (TC-P55ST30) No power

                "A" Board fixed my problem. Thanks for the assistance.

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK

                  #9
                  Re: Panasonic (TC-P55ST30) No power

                  Nice, thanks for the update.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                  Related Topics

                  Collapse

                  • PantherDave
                    Microsoft Surface Pro (5th gen) model 1796 - no power
                    by PantherDave
                    Hi all!

                    I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

                    I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
                    https://www.badcaps.net/forum/troubl...-hardware-devi...
                    05-29-2024, 02:01 PM
                  • GLISIT
                    Asus Probook P5440UF-XB74 power issue
                    by GLISIT
                    Hi all,

                    TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                    I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                    A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                    01-16-2025, 02:29 PM
                  • WVUfan
                    PS5 EDM-033 One Beep,No Lights, No Power Troubleshooting Help
                    by WVUfan
                    hello. i've a ps5 edm-033 mobo w/ no power, lights, but one beep when power pressed. i've hooked to uArt and only error code is 80871001 (DDR4 No Power or Short Circuit). i have a donor board, same model, that does power up, fan spins, blue light, and beeps 3 times, then powers off. it has a botched HDMI port replacement job. so w/ the board i'm interested in, with the error 80871001, i was able to research and obtain voltages of the SSD PMIC. i've attached pictures of the provided diagram by DylanBBK (@d62 on Discord) and my voltages and picture of my board. my question is on my picture...
                    08-11-2025, 01:12 PM
                  • Tynan Dill
                    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                    by Tynan Dill
                    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                    Upon bringing it home and plugging it up, it showed a standby light.

                    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                    The screen seems to blackout and stay black, but with a flashlight I can see the display.

                    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                    Assuming...
                    11-22-2024, 01:46 PM
                  • sam_sam_sam
                    Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                    by sam_sam_sam
                    I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                    One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                    03-31-2024, 02:12 PM
                  • Loading...
                  • No more items.
                  Working...