Capacitor values for eay3306450

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • Blueeyes
    Senior Member
    • Jun 2015
    • 60
    • Uk

    #1

    Capacitor values for eay3306450

    Hi guys I have a stupid problem after rushing in on a TV fix I changed some bad caps but in my haste and stupidity I didn't get the right uf ratings, so I'm hoping someone has the same board or can point me at where to look to find the answer the ones that stand out are
    C204-205 both at 10v 3300uf
    C208 50v 470uf
    C207 35v 1000uf
    C303 35v 470uf
    C222 35v 680uf
    If anyone could confirm which are the wrong values would really appreciate it
  • johnboy1313
    Badcaps Legend
    • Nov 2012
    • 1959
    • USA

    #2
    Re: Capacitor values for eay3306450

    What set did the board come out of?

    Comment

    • Blueeyes
      Senior Member
      • Jun 2015
      • 60
      • Uk

      #3
      Re: Capacitor values for eay3306450

      Its lg37c55-za

      Comment

      • Hamie
        Badcaps Legend
        • Apr 2014
        • 1383
        • UK

        #4
        Re: Capacitor values for eay3306450

        C204 - 10v 3300uf
        C205 - 10v 3300uf
        C208 - 35v 470uf
        C207 - 35v 1000uf
        C203 - 35v 470uf
        C222 - 35v 680uf

        They are all correct......

        Comment

        • Blueeyes
          Senior Member
          • Jun 2015
          • 60
          • Uk

          #5
          Re: Capacitor values for eay3306450

          C225 10 v 2200uf
          c216 10v 470uf
          Lastly C151 450v 82uf
          I thought I'd got one or two wrong

          Comment

          • neex
            Member
            • Jan 2017
            • 27
            • Canada

            #6
            Re: Capacitor values for eay3306450

            .
            Last edited by neex; 01-07-2017, 08:14 PM.

            Comment

            Related Topics

            Collapse

            • proxneo
              Recapping Sony ICF-SW55 - verifying cap values
              by proxneo
              Dear reader

              I am performing a repair on a Sony ICF-SW55, which includes recapping (some) of the SMD capacitors on the mainboard. I am looking for verification of their values. At the moment, I'm 95% sure I've got the right values, but it is hard to find some official, credible or multiple independant sources on this.

              At the moment, I have selected replacements based on the following list of values:

              3 x 470uF 10VDC
              3 x 4.7uF 35VDC
              4 x 47uF 50VDC
              8 x 22uF 6.3 VDC
              1 x 220uF 6.3VDC
              5 x 100uF 6.3VDC

              Which...
              06-21-2023, 12:38 AM
            • mrkmpn
              Capacitor values in boardview
              by mrkmpn
              I am trying to determine the value of a blown capacitor, and the boadview shows the values for many of the capacitors and other components on this board, but all of the information blank on others.

              Is there any relevance to the fact that some of these values are left out, or is it just inconsistency by whoever created the boardviews?

              Is there any way to deteremine if one without infrormation matches one that shows those details?
              05-25-2022, 12:03 PM
            • chth96
              If I replace with inferior capacitor, Is it No harm to other IC components at all?
              by chth96
              I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
              Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
              It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
              So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
              I know that these capacitor will not last as long as nichicon capacitor...
              12-22-2023, 04:34 AM
            • chth96
              How can I test non-polarized capacitor?
              by chth96
              I desoldered samwha NF capacitor(50v 5.6uf) from PCB circuit of 29inch CRT TV which have symptoms of no display after I heard sound of inrush of current to TV whenever I switch on this television.
              I measured ESR value of this non-polarized capacitor(samwha NF capacitor 50v 5.6uf) by means of MESR-100 ESR meter and It displayed 0.3 ohm

              And When I measured its capacitance with digital multimeter and LCR-T4 Mega328 meter, It displayed 10uf from DMM and 8uf from LCR-T4 meter.
              I found catalogue of samwha capacitor(samwha-catalogue_3.pdf file), which is attached to this thread,...
              06-02-2024, 07:31 PM
            • chth96
              Is it no harm to replace with capacitor without ripple current rating?
              by chth96
              When I tried to repair LG 29 inch CRT TV, I found that the ESR value of samyoung SMS capacitor(160v 2.2uf), which is very close to D1879 transistor, is 6 ohm.


              Judging from above ESR Meter Table,I think It is necessary to replace this sms capacitor.So I visited local electronics shop,and I purchased 160v 2.2uf rubycon YK capacitor.
              But when I browse through rubycon YK datasheet,I found that there is no ripple current rating for 160v 2.2uf specification. But On the contrary, I found 39 mA ripple current rating for 160v 2.2uf SMS capacitor.
              Rubycon YK DataSheet (b...
              04-19-2024, 05:19 AM
            • Loading...
            • No more items.
            Working...