Hello All,
This is my first post to the forums, I hope someone can point me in the right direction
I have a DSE branded 32" Plasma that works perfectly for anywhere from 5 minutes to an hour, after this time the screen decides to completely turn off and stay off however the sound remains and the remote is still responsive but nothing comes up on the screen.
The LED on the front of the screen is red in standby and green when on. When this happens the LED stays green.
If I turn it off then on again it will go back to working fine until it happens again.
The T.V has the following internals:
Mainboard:
CV068M1
PSU:
PS-7231-1-LF LITEON
P/N: EAY51348802
Y SUS:
LGE PDP 080515
BOARD: 32F1B_Y
P/N: EAX431775501
REV: M
LOC NO: 2XXX
EBR50523501
PD32089J099104
Z SUS:
LGE PDP 080515
BOARD: 32F1B_Z
P/N: EAX43177801
REV: L
LOC NO: 3XXX
EBR50524101
PD32089K066250
THANKYOU I ADVANCE!
This is my first post to the forums, I hope someone can point me in the right direction

I have a DSE branded 32" Plasma that works perfectly for anywhere from 5 minutes to an hour, after this time the screen decides to completely turn off and stay off however the sound remains and the remote is still responsive but nothing comes up on the screen.
The LED on the front of the screen is red in standby and green when on. When this happens the LED stays green.
If I turn it off then on again it will go back to working fine until it happens again.
The T.V has the following internals:
Mainboard:
CV068M1
PSU:
PS-7231-1-LF LITEON
P/N: EAY51348802
Y SUS:
LGE PDP 080515
BOARD: 32F1B_Y
P/N: EAX431775501
REV: M
LOC NO: 2XXX
EBR50523501
PD32089J099104
Z SUS:
LGE PDP 080515
BOARD: 32F1B_Z
P/N: EAX43177801
REV: L
LOC NO: 3XXX
EBR50524101
PD32089K066250
THANKYOU I ADVANCE!

Comment