Hello all. I'm a bit stumped on this one. I have a 50HDA39. It as a Sony PSU and LG everything else screen Y and X boards and Buffers. Here is what is happening.
Picture no, disconnect X and I get 1/2 of something see pic 1A
Sound yes
+ VA's are 60.4v
+ Vs's are 88.6v with X connected and 105.6 with X board disconnected
+ 5v's are 5.1.
with x connected, Y boards heat sinks are warm to the touch and x Board heat sinks are one warm one cold. testing around the cold voltages are bad. I am going to remove sink and inspect closer. with x board connect using the remote I get vertical bars only and they change when scrolling the input. In pic 1A the bars are there and to the right is the part of the picture that moves, this is one of the things that has me stumped. I did replace the 3 470mf250v caps on the PSU, only one was bad. Thanks in advance DAB
Picture no, disconnect X and I get 1/2 of something see pic 1A
Sound yes
+ VA's are 60.4v
+ Vs's are 88.6v with X connected and 105.6 with X board disconnected
+ 5v's are 5.1.
with x connected, Y boards heat sinks are warm to the touch and x Board heat sinks are one warm one cold. testing around the cold voltages are bad. I am going to remove sink and inspect closer. with x board connect using the remote I get vertical bars only and they change when scrolling the input. In pic 1A the bars are there and to the right is the part of the picture that moves, this is one of the things that has me stumped. I did replace the 3 470mf250v caps on the PSU, only one was bad. Thanks in advance DAB
Comment