Bush LCD37TV016HD Vertical Lines Problem
Hi guys.
My father in law has had this TV for approx 6 years with no problems until about 2 weeks ago.
When the TV gets turned on its fine for about 5 minutes (sometimes it lasts only a few seconds) but then LOTS of vertical lines appear.
Its so bad that the picture on the screen just vanishes when this happens.
Tried HDMI, Scart, Composite etc but it still happens.
Took the back panel off & had a look at the PSU board & T-Con board but not really sure what I'm looking for tbh.
I've googled this problem all day & read the various posts in the forums but most of them are to do with the TV not powering up so not much use to me really.
TV powers up & there is sound.
If I turn off the TV as soon as the vertical lines appear & then turn it on again the lines are away, but they just reappear again.
Time varies from seconds to 20ish minutes.
Any help/info to try & sort this problem out would be greatly appreciated.
Thanks for taking the time to read this.
My father in law has had this TV for approx 6 years with no problems until about 2 weeks ago.
When the TV gets turned on its fine for about 5 minutes (sometimes it lasts only a few seconds) but then LOTS of vertical lines appear.
Its so bad that the picture on the screen just vanishes when this happens.
Tried HDMI, Scart, Composite etc but it still happens.
Took the back panel off & had a look at the PSU board & T-Con board but not really sure what I'm looking for tbh.
I've googled this problem all day & read the various posts in the forums but most of them are to do with the TV not powering up so not much use to me really.
TV powers up & there is sound.
If I turn off the TV as soon as the vertical lines appear & then turn it on again the lines are away, but they just reappear again.
Time varies from seconds to 20ish minutes.
Any help/info to try & sort this problem out would be greatly appreciated.
Thanks for taking the time to read this.
Comment