hi
old post this but new problem just changed mainboard on this set, previous mainboard dead
on fitting replacement used board (ebay) everything works picture is spot on but picture is upside down
have tried a reset still same, is there a setting in the service menu to fix this.
firmware update maybe
is it a faulty replacement board, no other available at this time
if I hang it on the wall upside down it would be fine
any ideas please, before I pull out all of my hair
old post this but new problem just changed mainboard on this set, previous mainboard dead
on fitting replacement used board (ebay) everything works picture is spot on but picture is upside down
have tried a reset still same, is there a setting in the service menu to fix this.
firmware update maybe
is it a faulty replacement board, no other available at this time
if I hang it on the wall upside down it would be fine
any ideas please, before I pull out all of my hair
Comment