Panasonic TC-P55GT30 will not turn on, seven blinks from LED

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tw2005
    Badcaps Legend
    • Oct 2011
    • 6458
    • Australia

    #21
    Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

    Originally posted by Ben09
    According to the flowchart, after disconnecting SC20 it gives 8 blinks. So I will contact the seller and have them send me a different one.
    I think that's the correct option so long as you've check everything at your end especially that all cabling is connected, sometimes people disconnect things and come back to a project forgetting to reconnect cables but a change to 8 is a good indicator Sc fault.

    just make sure you've checked those sd/su boards thoroughly for shorted buffer ICs, last thing you want is to blow up a good Sc. If you don't have the training guide for this i can upload it. different to the standard service manual

    Comment

    • tw2005
      Badcaps Legend
      • Oct 2011
      • 6458
      • Australia

      #22
      Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

      If and when you get another SC you can do a test without the buffers connected and if it turns on witout a shutdown error blink that generally means Sc passed.

      that way you know it was good and if after connecting the sd/su and it errors then there's an issue with those.

      There is a official procedure for it involving jumping the sc50 connector pins and having the sd/su unbolted from the Sc and also electrically disconnected from the SC.
      Last edited by tw2005; 08-03-2015, 07:17 AM.

      Comment

      • Ben09
        Member
        • Jul 2015
        • 20
        • USA

        #23
        Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

        According to this Shop Jimmy video, I checked the voltages of the TP82 and the other one and they didn't come up correct. I was reading the voltage is wrong. This morning I checked and the other one correctly read 5 volts. The other one, the TP82 only said 1 volt unless I'm measuring it wrong. I already tried swapping the power board out with no difference. According to this video, the a board would be the next step. But the flow chart you posted indicated that it 8 blinks after disconnecting SC20 was still an SC problem.
        https://www.google.com/url?sa=t&sour...svsxkLPQiUgklg

        Comment

        • Ben09
          Member
          • Jul 2015
          • 20
          • USA

          #24
          Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

          Thanks, I will have to try that if and when I get a different one. Because 6 blinks doesn't indicate SD or SU at all correct?

          Comment

          • tw2005
            Badcaps Legend
            • Oct 2011
            • 6458
            • Australia

            #25
            Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

            Originally posted by Ben09
            Thanks, I will have to try that if and when I get a different one. Because 6 blinks doesn't indicate SD or SU at all correct?
            no, i have not seen 6 for that. just make sure the buffers are good.

            do you have the gt30 guide?

            just had a look at 7 blink which you had. Says update firmware after replacing sc or ss for 7 blink. Also has in order of likelihood

            1. SC

            2> sd/su

            3. SS

            that's a new one SS for 7 blink

            may want to see if panasonic can tell you where or how to get the firmware

            they do have a site for updates , just don't know if that's going to have the update for the SC/SS issue

            They may ask how you know which could be awkward since these docs are probably meant for internal use?
            Last edited by tw2005; 08-03-2015, 08:47 AM.

            Comment

            • tw2005
              Badcaps Legend
              • Oct 2011
              • 6458
              • Australia

              #26
              Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

              http://av.jpn.support.panasonic.com/.../down_na1.html

              Comment

              • Ben09
                Member
                • Jul 2015
                • 20
                • USA

                #27
                Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

                Here is a picture of the SC card. The eBay seller is yalucinc2012.
                Attached Files

                Comment

                • Ben09
                  Member
                  • Jul 2015
                  • 20
                  • USA

                  #28
                  Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

                  Originally posted by tw2005
                  no, i have not seen 6 for that. just make sure the buffers are good.

                  do you have the gt30 guide?

                  just had a look at 7 blink which you had. Says update firmware after replacing sc or ss for 7 blink. Also has in order of likelihood

                  1. SC

                  2> sd/su

                  3. SS

                  that's a new one SS for 7 blink

                  may want to see if panasonic can tell you where or how to get the firmware

                  they do have a site for updates , just don't know if that's going to have the update for the SC/SS issue

                  They may ask how you know which could be awkward since these docs are probably meant for internal use?
                  I do have the PDF troubleshooting guise for it. Huh, SS board. Yeah that is interesting. Well I couldn't update the firmware until I fixed it correct?

                  Comment

                  • Ben09
                    Member
                    • Jul 2015
                    • 20
                    • USA

                    #29
                    Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

                    Update: I heard back from the seller. He said he tested it in a unit successfully before he sent it, and to make sure to check my SU and SD cards. He said my old SC card caused one of his SU cards to short out, but that might have been because my father in law removed a couple components.

                    I really hope one of those is the problem. I'm just about ready to sell this off board by board and get a new TV.

                    Comment

                    • Ben09
                      Member
                      • Jul 2015
                      • 20
                      • USA

                      #30
                      Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED



                      It works now! The new SC card worked, my father in law and I neglected to put in the four large screws connecting the SC card with the SU and SD cards. I can't believe we missed that, but I blame that on neither of us having done this type of troubleshooting before.

                      I'm going to send back the power and subpower boards for a refund from the seller.

                      Thanks for all your help on this issue!
                      Last edited by Ben09; 08-11-2015, 06:30 AM.

                      Comment

                      • tw2005
                        Badcaps Legend
                        • Oct 2011
                        • 6458
                        • Australia

                        #31
                        Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

                        Originally posted by Ben09


                        It works now! The new SC card worked, my father in law and I neglected to put in the four large screws connecting the SC card with the SU and SD cards. I can't believe we missed that, but I blame that on neither of us having done this type of troubleshooting before.

                        I'm going to send back the power and subpower boards for a refund from the seller.

                        Thanks for all your help on this issue!
                        oh my god, really. yes no earth on the buffers wil do that. have not read for a while but that seller does a lot of repairs and has 100% feedback so looks like the seller was right and a goof up at your end. Lucky the seller accepted the board if you attempted repairs and removed bits.
                        Last edited by tw2005; 08-11-2015, 08:12 AM.

                        Comment

                        • Ben09
                          Member
                          • Jul 2015
                          • 20
                          • USA

                          #32
                          Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

                          Originally posted by tw2005
                          oh my god, really. yes no earth on the buffers wil do that. have not read for a while but that seller does a lot of repairs and has 100% feedback so looks like the seller was right and a goof up at your end. Lucky the seller accepted the board if you attempted repairs and removed bits.
                          Yeah basically. When I put the new SC board in my father in law was helping and I guess he overlooked it as well. Yeah I'm glad they accepted it anyway. To be fair they didn't specify that I couldn't have attempted repairs, just that they wanted the core board. Maybe they'll change their description lol. I kind of wish my father in law didn't attempt repairs and just let me send it in to get repaired, would have saved me $40 but oh well, it's working now.

                          Comment

                          • tw2005
                            Badcaps Legend
                            • Oct 2011
                            • 6458
                            • Australia

                            #33
                            Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

                            Originally posted by Ben09
                            Yeah basically. When I put the new SC board in my father in law was helping and I guess he overlooked it as well. Yeah I'm glad they accepted it anyway. To be fair they didn't specify that I couldn't have attempted repairs, just that they wanted the core board. Maybe they'll change their description lol. I kind of wish my father in law didn't attempt repairs and just let me send it in to get repaired, would have saved me $40 but oh well, it's working now.
                            some of these are not too bad to repair DIY, can be lucky and just need new 30F131 IGBTs but if there's more than that hard if you've never done a SC before, anyway not all in vain, I think they're worth fixing since no more Panny Plasmas around. Just saw a 50U30 go for $400 used here, that's top dollar

                            Comment

                            • Ben09
                              Member
                              • Jul 2015
                              • 20
                              • USA

                              #34
                              Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

                              Originally posted by tw2005
                              some of these are not too bad to repair DIY, can be lucky and just need new 30F131 IGBTs but if there's more than that hard if you've never done a SC before, anyway not all in vain, I think they're worth fixing since no more Panny Plasmas around. Just saw a 50U30 go for $400 used here, that's top dollar
                              Ok, yeah that's true. Basically came out to be a $100 fix which is way cheaper than buying a new TV and it's hard to beat the picture, short of the new OLEDs I suppose, and those are $2500+.

                              Comment

                              • tw2005
                                Badcaps Legend
                                • Oct 2011
                                • 6458
                                • Australia

                                #35
                                Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

                                Originally posted by Ben09
                                Ok, yeah that's true. Basically came out to be a $100 fix which is way cheaper than buying a new TV and it's hard to beat the picture, short of the new OLEDs I suppose, and those are $2500+.
                                can't complain at $100, can't imagine what a shopr woul dquote , probably $300-400

                                Comment

                                • Ben09
                                  Member
                                  • Jul 2015
                                  • 20
                                  • USA

                                  #36
                                  Re: Panasonic TC-P55GT30 will not turn on, seven blinks from LED

                                  Any word on how it holds up after being fixed? Do people have better luck now with the locking washers?

                                  Comment

                                  Related Topics

                                  Collapse

                                  • Andre Gilbert
                                    Panasonic TC-P55ST50 8 blinks then no blinks
                                    by Andre Gilbert
                                    Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
                                    Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

                                    TV Model: Panasonic TC-P55ST50
                                    ...
                                    11-20-2024, 08:52 PM
                                  • Biruslapio
                                    Panasonic P58V11B 8 and 12 blinks error "fix"
                                    by Biruslapio
                                    Bought this TV used not working, panel flashed briefly on power up and it was blinking 8 times, a quick look on SS board revealed a common fault on the 3uF 250V capacitors, C201 to C205 (C1620X in the service manual), the solder joints were all cracked, C201 and C205 pins were darkened and some sparking had occurred on them, C201 was split open and clearly overheated in its last hours, replaced that one and resoldered the others, 8 blinks fixed.

                                    Also the previous owner broke the antenna connector by taking the TV out of the wall mount forgetting to unplug it, I desoldered the tuner...
                                    04-13-2021, 07:13 AM
                                  • jm1234
                                    Panasonic plasma TX-P42ST50 - 6 blinks
                                    by jm1234
                                    Hi,
                                    anyone able to provide the service manual for old plasma Panasonic TX-P42ST50E?
                                    It turns off almost immediately (0~5 seconds after pressing the on/off button) and starts flashing the red diode 6 times.
                                    I disconnected the left-hand side board (SC?, both the ribbon cable and the power cable to it) and also another ribbon going to bottom left board. Then the led signal is 8 flashes. According to service guide to another Panasonic plasma it would mean the left-hand side board is faulty. But I'm not sure it 100% applies to my model.
                                    I checked that board for any obvious faults...
                                    05-22-2024, 06:59 AM
                                  • pajdek
                                    Lenovo Y700-17ISK turn on and off
                                    by pajdek
                                    Hello, i have some issues with my laptop Lenovo Y700-17ISK (motherboard BY511 NM-A541), it started when i turn on the laptop, but the lcd wont turn on, i then connected it via hdmi to tv and screen was ok. So i thought maybe lcd stripe is faulty, i removed the bottom cover, disconnected main battery, reset the cmos by disconnecting battery for 1 min, then slighty move the lcd stripe. Conncted power supply and tuned on my laptop, the lcd turn on, it started to load os, then it turn off, after a second it turn on, then after like 3 seconds turn off again, and so on. Removed power supply, waited...
                                    09-20-2023, 02:49 AM
                                  • Alicat
                                    Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
                                    by Alicat
                                    Hello,

                                    Stopped by this site trying to fix my parents Panasonic Plasma TV.

                                    Model number is TH-50PZ85U

                                    Power comes on and the red power light stays on solid.

                                    Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

                                    I also hear a few clicks.

                                    I also think my parents said there was a thunderstorm and the TV failed after that.

                                    Section 6 in the service manual talks about power and no screen,...
                                    10-30-2024, 10:09 AM
                                  • Loading...
                                  • No more items.
                                  Working...