Panasonic Firmware Upgrade

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Roj.
    Old enough...
    • Feb 2015
    • 17
    • Australia

    #1

    Panasonic Firmware Upgrade

    Hello Badcappers

    Have you successfully loaded firmware onto 'physically' identical' A-Board
    • of different screen size?
    • from a different country?

    I have downloaded the desired firmware from
    http://av.jpn.support.panasonic.com/...a/down_oc.html
    Unzipped, a single file of 23MB ' SDDL.SEC ' results, unlike a YouTube contribution which suggests 3 files
    https://www.youtube.com/watch?v=nh448nktoOA

    Any advice welcome

    Cheers
    Roj.
    Last edited by Roj.; 07-11-2015, 07:06 PM. Reason: improve reading
    Old enough to know better
  • tw2005
    Badcaps Legend
    • Oct 2011
    • 6458
    • Australia

    #2
    Re: Panasonic Firmware Upgrade

    firmware alone will not get you and aussie board plus I'm pretty sure it will check the board and then quit as it will see you're trying to flash the wrong firmware for that board.

    Comment

    Related Topics

    Collapse

    • dkneyle
      Sony KDL-46HX850 Can't upgrade/update firmware
      by dkneyle
      Diagnosed this TV as having a failed main board which I've replaced with one from a KDL 55HX850. They are (supposedly) the same board.

      Being 'Smart TV' it requires a firmware reboot when you swap out boards such as T-Con or main board. It starts with a black screen and flashing yellow and green LEDS, indicating it needs that firmware boot. The procedure described all over the web is to put the software into the root directory of a FAT32 formatted USB drive and it should load that up once plugged into USB1 port. But not for me. I can see the LED on the USB chip flash for about...
      09-25-2024, 10:44 PM
    • l3emarsh
      Firmware needed for A Panasonic TX-55FX555B 4K HDR TV
      by l3emarsh
      I have a Panasonc/vestel 55" 4K HDR TV and I need A copy of the Firmware.

      I replaced the main board and someone gave me a 43" FINLUX firmware as it is a Panasonic Vestel version, it got the TV working again but the PIP will not work, I can only assume that it's because the Firmware thinks it is 43" tv?

      I was greatfull for the TV to be workng again and it's been okay, but now I want to get it set up correctly.

      If anyone has a copy of the firmware I need PLEASE help me out and send me A copy.

      Greatfull for any help.
      ...
      01-11-2022, 07:44 PM
    • TheUser
      Thinkpad Docker G2 Type-C 40AS - Firmware Unknown
      by TheUser
      Hello to everyone ,

      This is my first post here, and i would like to share with you a small story in case you can help me.

      Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.

      All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work

      I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...
      02-10-2024, 02:07 PM
    • gurj1979
      Ubiquiti firmware help. US-8-150W POE
      by gurj1979
      Hi guys.

      I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
      Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.

      So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
      Got New chip and writes good.

      THE PROBLEM...
      It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.

      Does anyone have a Good Firmware I can have?...
      07-22-2024, 05:13 PM
    • alltvrepairs
      Graetz / Akai CV338H-T50 bricked after firmware upgrade
      by alltvrepairs
      Hi,

      The original fault was set not loading completely and reboots. I have downloaded a firmware on usb, tried the upload but midway says incorrect spftware and shuts down. I have blank raster now.
      Anyone has experience on this mainboard?

      In the download there are other apart from CtvUpgrade.bin



      ...
      03-15-2024, 12:18 PM
    • Loading...
    • No more items.
    Working...