Plasma TV screen issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tech2014
    Badcaps Veteran
    • Aug 2014
    • 807
    • Canada

    #1

    Plasma TV screen issue

    The tv was working then all of a sudden there was a loud pooping sound then the screen went black. There appears to be ghost images on screen, see pic below. Is this a bad screen or something that can be fixed easily. Its an LG 60PCID-UE

    Attached Files
  • Alastair E
    Chief Womble
    • Mar 2013
    • 1963
    • U.K.

    #2
    Re: Plasma TV screen issue

    It'll be one or more of the IPM's.

    Hard to change, only S/H ones available and expensive, so recommend you ascertain which board has the faulty one--and replace the whole board....
    TELEFIX

    How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
    http://www.irf.com/technical-info/appnotes/an-1088.pdf
    PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

    Comment

    • tech2014
      Badcaps Veteran
      • Aug 2014
      • 807
      • Canada

      #3
      Re: Plasma TV screen issue

      will do, thanks.

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Plasma TV screen issue

        To add to Alastair's comments, most likely Z-sustain IPM bad
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • tech2014
          Badcaps Veteran
          • Aug 2014
          • 807
          • Canada

          #5
          Re: Plasma TV screen issue

          thanks Tom, appreciate your help.

          Comment

          • mmartell
            Badcaps Legend
            • Oct 2013
            • 3189
            • Canada

            #6
            Re: Plasma TV screen issue

            Good luck finding a decent priced board - I am in the market as well. Current ebay prices floating around $200, too much for a set of this vintage imho.

            I already replaced the erc ipm I think it was. Set ran beautifully for about ten hours before popping again.
            Last edited by mmartell; 04-27-2015, 05:15 PM.

            Comment

            • krizzy
              New Member
              • Apr 2015
              • 3
              • Australia

              #7
              Re: Plasma TV screen issue

              Hope i dont upset anybody by posting this question here. Can someone give me an idea of if this would stop a plasma screen tv from displaying? see attached photo
              Attached Files

              Comment

              • jjanssen7
                Badcaps Veteran
                • Nov 2012
                • 252
                • Canada

                #8
                Re: Plasma TV screen issue

                Absolutely would not display an image with a crack like that.

                Comment

                • capkid
                  Badcaps Legend
                  • Oct 2010
                  • 1339
                  • United States

                  #9
                  Re: Plasma TV screen issue

                  IPM replacememt: https://www.youtube.com/watch?v=Y8MNQYXw8E0
                  Last edited by capkid; 04-27-2015, 09:50 PM.
                  LG Plasma Mal-Discharge Correction Service

                  Comment

                  • krizzy
                    New Member
                    • Apr 2015
                    • 3
                    • Australia

                    #10
                    Re: Plasma TV screen issue

                    Originally posted by jjanssen7
                    Absolutely would not display an image with a crack like that.
                    Alrighty then, to the tip I go. Thank you for your input

                    Comment

                    • tw2005
                      Badcaps Legend
                      • Oct 2011
                      • 6458
                      • Australia

                      #11
                      Re: Plasma TV screen issue

                      Originally posted by krizzy
                      Alrighty then, to the tip I go. Thank you for your input
                      could be worth flogging on Ebay for parts. what is it? working remote?

                      That way you get paid for someone else taking the trash out.

                      Comment

                      • krizzy
                        New Member
                        • Apr 2015
                        • 3
                        • Australia

                        #12
                        Re: Plasma TV screen issue

                        Originally posted by tw2005
                        could be worth flogging on Ebay for parts. what is it? working remote?

                        That way you get paid for someone else taking the trash out.
                        Its a Samsung PS42C451B2D and yes has working remote, I tried to turn it on again for the last attempt but now doesn't even make the start up tone unless the power to the logic board or power to the y-sus is disconnected. Thanks for the suggestion but I think age and lack of use (sitting unused) has now got the better of it.

                        Comment

                        • tw2005
                          Badcaps Legend
                          • Oct 2011
                          • 6458
                          • Australia

                          #13
                          Re: Plasma TV screen issue

                          Originally posted by krizzy
                          Its a Samsung PS42C451B2D and yes has working remote, I tried to turn it on again for the last attempt but now doesn't even make the start up tone unless the power to the logic board or power to the y-sus is disconnected. Thanks for the suggestion but I think age and lack of use (sitting unused) has now got the better of it.
                          yeah well with cracked panel possibly shorted and now boards could also be shorted out trying to power this up.

                          I had an old Sanyo remote, was going to toss it but got $25 but they're unavailable and was Original. You just don't know what is junk to one can be handy for others. Even stands can be worth something for those who wall mount and toss them out then someone needs a stand later?

                          Sometimes just not worth the hassle.

                          Comment

                          Related Topics

                          Collapse

                          • wizard13
                            Dynabook Satellite Pro C50D-B-100 - BIOS Issue, Black Screen
                            by wizard13
                            Hello everyone,

                            I am experiencing a BIOS-related issue with my Dynabook Satellite Pro C50D-B-100. When I power on the laptop, the screen stays black, and there is no response from the system. I suspect a corrupted BIOS.

                            I have checked the forum and the available documentation but could not find a solution specific to my issue.
                            • Brand & Model: Dynabook Satellite Pro C50D-B-100
                            • Part Number (P/N): PYU13E-00C00PFR
                            • Serial Number (S/N): 22028896H
                            • System Configuration (SC): A1PYU13E1127
                            • Motherboard Model: IP3_ACN16_MB_V21_20211222A
                            • Power Input: DC 19V –
                            ...
                            02-28-2025, 02:43 AM
                          • Ryan.man
                            Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                            by Ryan.man
                            Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                            My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                            This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                            02-04-2025, 12:23 PM
                          • cloudy
                            HELP - Contrast/brightness issue with subtitles on screen
                            by cloudy
                            Hi everybody
                            Since day one I'm having an unpleasant contrast/brightness issue on my Asus laptop.
                            Basically while watching movies, if subtitles appear on screen, the contrast or the brightness of the entire screen increases a lot (not sure if it'is brightness or contrast), disturbing the viewing of the movie.

                            Last year I replaced my screen because got damaged and this contrast/brigthness issue persists. It happens only on the laptop screen, in fact If i plug an external HDMI screen the issue does not occour on it.

                            It occours both on ubuntu and windows...
                            01-01-2023, 05:12 PM
                          • ScHAmPi
                            Samsung UE48JU7000 screen issue after backlight replacement
                            by ScHAmPi
                            Hi all,

                            Because of two bright spots and a couple of dark spots I decided to replace the backlights in my Samsung UE48JU7000. See attached photos:


                            I thought all went well, but after full assembly and testing it out it turns out not all is fine. The backlights are completely fine but I have some weird issues on the right half of the screen. Since I didn't really touch the T-CON board (apart from taking out the ribbons of the display and reconnecting them on assembly) it would be weird that the issue is with the T-CON board... But based on the behavior of the service...
                            07-15-2024, 05:41 AM
                          • Alicat
                            Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
                            by Alicat
                            Hello,

                            Stopped by this site trying to fix my parents Panasonic Plasma TV.

                            Model number is TH-50PZ85U

                            Power comes on and the red power light stays on solid.

                            Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

                            I also hear a few clicks.

                            I also think my parents said there was a thunderstorm and the TV failed after that.

                            Section 6 in the service manual talks about power and no screen,...
                            10-30-2024, 10:09 AM
                          • Loading...
                          • No more items.
                          Working...