Does anybody have a service manual or link for a Sharp Aqueos 80" LCD TV? I have one that won't come on and I would like to see where the error code is pointing me. I believe it may be a power supply problem from the code (25) if memory serves me correct. Thank you in advance.
-
-
Re: Sharp 80" LCD Code 25
I was just wondering if anyone had any experience with a code 25 on a Sharp 80" LCD. It does not turn on or reset. Any ideas? -
-
Re: Sharp 80" LCD Manual
2-5 code could be t-con or bad panel.Comment
-
Re: Sharp 80" LCD Manual
Try disconnecting the 2 flat cables going from the t-con to the panel, if the tv comes on with backlight then the panel is most likley bad (in most cases I've seen the panel is broken)Last edited by R_J; 04-09-2015, 11:06 AM.Comment
-
ALL LCD LED TV SERVICE MENU CODES
Service Menu Code with Board Name
China Universal Board / Jumper Board Service Menu Code
Changhong Ruba Service Menu Code
Ecostar LED TV Service Menu Code
Orient LED TV Service Menu Code
Haier LED TV Service Menu Code
TCL LED TV Service Menu Code
Samsung LED TV Service Menu Code
LG LED TV Service Menu Code
Videocon LED TV Service Menu Code
Supra LED TV Service Menu Code
Toshiba LED TV Service Menu Code
Symphony LED TV Service Menu Code
Veste/ LED TV Service Menu Code...10-31-2024, 03:58 AM -
Hi Folks
I am searching for a Sharp 32BC2K0 Service Manual
Sharp 32BC2K0 << Could be an "O" as in Orange or a Zero
Fault - Coloured "Bars" very thin all across the screen.
I would like tho get the values for the 2 Resistors and I believe a Missing Capacitor.
I would Like a Service Manual, that has the component values, and locations, as the PCB isnt that clear as for designations
Is there such thing as a Boardview for this TV?
I will Post the Photos in a second
Thanks
Stay Safe !... -
Kindly somebody share schematic diagram for Sharp 2T-C42EG1X (Board: QPWBNH1 96WJN1 )
Most of the smd resistors were burned
Thanks in advance...09-05-2025, 10:19 AM -
Hi all,
I have a Sharp LC-C5262U that just quit on me after many years. The display and sound went out while watching a program. The power light stays on but the TV is unresponsive.
About 2 minutes after plugging it in, I get what I presume is an error code but I have yet to find out what this means. The Power and OPC LEDs blink together once, then the Power LED blinks twice more.
https://photos.app.goo.gl/9p7pdfep4BjbekqE8
I found another post somewhere that referred to this as a "3-1" code, but it was for a different model... -
Hi there,
First, I'm not sure it's the right section to post for this type of device, but could not think of something better.
Ok, so my son (a mechanic) bought a faulty Hofmann Geodyna 6300 wheel balancer (which appears to be mostly a re-branded Snap-on wheel balancer).
I'm looking for any resources (doc, manuals, schematics) that would be available for this device or anyone that would have any knowledge on this particular device (or its Snap-On equivalent).
I'm trying to diagnose the fault(s ?), but I can't find any schematic (appart from the...
Comment