Replacement Panel from partstore.com (Best Buy)

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • djw43
    Senior Member
    • Mar 2015
    • 95
    • United States
    #1

    Replacement Panel from partstore.com (Best Buy)

    Hello,
    I am a green newbie here, my original plasma TV is a pioneer PDP-502MX that I purchased new in around 2002, I also bought a 55" vizio from costco in 2006.
    That was pretty much my total exposure to plasma TV's.
    Last week I bought a TC-65PVT50 used and unfortunately I cracked the panel trucking it home,
    I see that the panel cannot realistically be replaced with an original panel for under $1000, but I did see a refurbished panel for sale at partstore.com for $240, I am wondering if this is a decent replacement, has anyone had a good experience with these substitute panels in any of the panasonic plasma's.
    I don't have a definite answer regarding shipping but my order has "free shipping" and there could be a $40 extra charge for more than 30lbs less than 80lbs or extra $70 for more than 15k cu in.
    I am in between replacing the screen or selling the remaining parts.
    Any advice would be greatly appreciated.
    thanks,
    dave in NJ
    Attached Files
    Tags: None
    • splitcrete
      Badcaps Veteran
      • Dec 2012
      • 387
      • usa
      #2
      Re: Replacement Panel from partstore.com (Best Buy)

      A couple years ago I ordered a panel from them. When I received it the box it was in looked like it was dragged, and kicked all the way to my house. Need I say it was in two pieces. UPS was the carrier and they suck. I sent it back and after a month I got my money back. I will never buy from them again.

        Comment

        • djw43
          Senior Member
          • Mar 2015
          • 95
          • United States
          #3
          Re: Replacement Panel from partstore.com (Best Buy)

          Originally posted by splitcrete
          A couple years ago I ordered a panel from them. When I received it the box it was in looked like it was dragged, and kicked all the way to my house. Need I say it was in two pieces. UPS was the carrier and they suck. I sent it back and after a month I got my money back. I will never buy from them again.
          thanks for that info, i guess i will be selling parts on ebay

            Comment

            • djw43
              Senior Member
              • Mar 2015
              • 95
              • United States
              #4
              Re: Replacement Panel from partstore.com (Best Buy)

              I called the partstore.com supplier Andrews electronics, they said forget it, they will never have that panel in stock.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • JayFixesIT
                  LG 65UH9500 TV Panel replacement seal?
                  by JayFixesIT
                  Hi,

                  I am in the process of replacing the backlight boards on the LG 65UH9500 TV. It requires the separation of the front glass/panel to get to the boards. The panel is help on to the frame with some kind of strips that I cannot reuse to adhere the screen to the frame. Anyone have any experience/Ideas on what I can use to securely hold the 65" Panel to the frame. I would hate for the panel to fall face forward. Thank you in advance....
                  09-08-2024, 11:15 AM
                • howardc64
                  LG 49UJ6500 LCD panel lighter band that goes away
                  by howardc64
                  49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

                  Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
                  02-19-2023, 12:13 AM
                • triplefour
                  SAMSUNG UN50TU8000F rebooting, backlight ok. No 12v to panel boards.
                  by triplefour
                  TV flashes backlight then reboots over and over. no image. Client said it used to have image for a bit before rebooting. Got worse over time.

                  tcon is built into mainboard.
                  Only one cable goes to panel boards.
                  there is a cable from one panel board to the other that links them.
                  cost cutting measure that results in us having harder time to diagnose.
                  removing the link to the second panel board allows TV to stay on with stable backlight but no image.
                  used cut off tape method to mask 1 maybe 2 pins on the side of the cable that goes to that second panel board....
                  07-28-2022, 07:59 PM
                • Storyteller12
                  QN55Q60R Service Menu Panel Help
                  by Storyteller12
                  I had a the above tv qn55q60r that had a bad panel but everything else good. I had another panel here from un55nu6900 with bad leds and melted diffusers.

                  I put the nu6900 panel in and powered it up and it does work but there are lines vertical lines.

                  I was trying to change the panel type in the service menu but don’t see my exact panel. Anyway to fix this or someone have similar experience.

                  the clear picture is the panel type from the service menus on the nu6900. The other 1 is the panel type that was set for the q60r with the bad panel....
                  01-13-2024, 01:57 PM
                • maneatingmonkey
                  Missing LCD Panel Voltages VGH, VGL, VCOM (TCL 55P6US Sound & Backlight but NO Picture)
                  by maneatingmonkey
                  I have a TCL 55P6US with sound and backlight but no picture. This model does not have a T-CON board, and the right (rear perspective) panel board is fed from the left panel board. I have not been able to induce any change by disconnecting the secondary panel board or the tape cut-off method on the primary board.

                  There are a bunch of voltages missing on the panel boards. I can't find any shorted caps of the panel boards, and all of the missing voltage rails read in the kiloohms, which leads me to suspect the issue may lie on the circuit board, rather than a short in the panel.
                  ...
                  L Panel #1
                  11 Photos
                  03-27-2024, 07:17 AM
                • Loading...
                • No more items.
                Working...