LG 60pv450 no picture but has sound

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Al79
    Member
    • Mar 2015
    • 12
    • Canada

    #1

    LG 60pv450 no picture but has sound

    I've taken the back off and looked at the caps they all look good. I've also checked fuses they all are good. I've done some voltage checks but this is the first time I've worked on a TV so I'm not totally sure what I'm looking for. So the voltages I'm seeing are VS 203, VA 55, VY 180, VSC 150, VZB 14. Anything sticking out as a red flag? Is VZB suposed to be low (14v)?
  • Hamie
    Badcaps Legend
    • Apr 2014
    • 1383
    • UK

    #2
    Re: LG 60pv450 no picture but has sound

    Are all voltages matching the panel sticker?

    Comment

    • Shinju
      Badcaps Legend
      • Mar 2014
      • 1239
      • USA

      #3
      Re: LG 60pv450 no picture but has sound

      Check out my troubleshooting thread on this exact plasma display.

      https://www.badcaps.net/forum/showthread.php?t=42901

      Comment

      • Shinju
        Badcaps Legend
        • Mar 2014
        • 1239
        • USA

        #4
        Re: LG 60pv450 no picture but has sound

        I am going to say your vbz at 14v is a huge red flag that your ZSUS board is shot.

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #5
          Re: LG 60pv450 no picture but has sound

          Agreed; A common issue seems to be the ER inductor solder joints failing, which causes the Z-sustain IGBTs to fail after some time.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • Al79
            Member
            • Mar 2015
            • 12
            • Canada

            #6
            Re: LG 60pv450 no picture but has sound

            Ok. So I've checked the sticker all voltages are good but the VZB (14v). I tried unhooking the ribbon cable and the buffer and still I only get 14v. I pulled the card out and it looks find nothing burnt and the inductor solder joints are fine. I've looked to buy a z-sustain board but no one seems to have one. It's a Lge pop 100920 board 60r3_z partno EAX62076601 rev G if any one has one please let me know.

            Comment

            • Al79
              Member
              • Mar 2015
              • 12
              • Canada

              #7
              Re: LG 60pv450 no picture but has sound

              Can anyone tell me how to put this tv into a test pattern?

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #8
                Re: LG 60pv450 no picture but has sound

                Really no point if Vzb is so low. But, if you want... Jumper EXT AUTO GEN on control board and disconnect LVDS cable (runs between main & control boards)

                That'll engage the test pattern - without the Z-sus it'll be very distorted though...
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • Al79
                  Member
                  • Mar 2015
                  • 12
                  • Canada

                  #9
                  Re: LG 60pv450 no picture but has sound

                  Tom66 thanks. The only reason I asked this as I was told that the logic board could be the problem and this could also give a low voltage on the vzb.

                  Comment

                  • Al79
                    Member
                    • Mar 2015
                    • 12
                    • Canada

                    #10
                    Re: LG 60pv450 no picture but has sound

                    Ok so everyone knows my tv is fixed. It turns out that my z-sustain card was fine but my control board was shot. If anyone is in need of z- sustain I have a spare and it's tested.

                    Comment

                    • HPJ
                      New Member
                      • Nov 2008
                      • 1

                      #11
                      Re: LG 60pv450 no picture but has sound

                      Sorry to revive an old thread but AL79 any chance you still have the zsus?

                      Comment

                      Related Topics

                      Collapse

                      • TR103
                        Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                        by TR103
                        Hi, I have a Samsung UE50TU with:
                        - sound and backlight, but no picture
                        - when it arrived, it had a picture for a few seconds
                        - it keeps rebooting
                        - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                        - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                        - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                        - without cable between mainboard and lcd panel and with a jumpered...
                        01-22-2025, 04:12 PM
                      • Mgiffune
                        Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
                        by Mgiffune
                        I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

                        I ordered a supposedly ‘new' Tcon board this time, and
                        ...
                        06-09-2024, 10:28 AM
                      • Ierwin
                        Samsung UE60KU6079 backlight okay mainboard responsive, no picture, no sound
                        by Ierwin
                        Hello everyone,
                        Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
                        The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
                        He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
                        I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
                        Anyway I still fully expect that there has been something seriously damaged...
                        05-13-2025, 03:31 PM
                      • jchang
                        Samsung UN70NU6900F no picture and no sound
                        by jchang
                        Hi all

                        I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.



                        Symptom:
                        No picture no sound.
                        When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
                        No sound at all.



                        What I tried:
                        1. I tried unplugging the left or right ribbon...
                        01-09-2023, 06:28 PM
                      • ChaosLegionnaire
                        what i went through dealing with my mobo with dead onboard sound!
                        by ChaosLegionnaire
                        so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

                        i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
                        09-13-2022, 09:02 AM
                      • Loading...
                      • No more items.
                      Working...