LG 47LB5D No Pic, has audio & backlight

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Audioplus
    Senior Member
    • Feb 2012
    • 157
    • USA

    #1

    LG 47LB5D No Pic, has audio & backlight

    Replaced power supply, same issue, replaced main board and on bench it displayed, menu, various inputs. Placed cover back on and reverted back to original no picture scenario, has backlight and audio. I replaced t-con board, did not help.
    I understand that these have ribbon cable issue at times, however I don't think this is the problem.
    Any suggestions? Thank you!
  • mmartell
    Badcaps Legend
    • Oct 2013
    • 3189
    • Canada

    #2
    Re: LG 47LB5D No Pic, has audio & backlight

    You've replaced everything but the inverter and you say you have backlight so you've received a faulty board, either main or tcon. When not working do you have a black screen or white screen or other ?

    I had one of these and removing the dimming cable from tcon to inverter helped but doesn't sound like the same issue.

    Comment

    • Audioplus
      Senior Member
      • Feb 2012
      • 157
      • USA

      #3
      Re: LG 47LB5D No Pic, has audio & backlight

      Can something create a short to the main board? The reason I ask, when I replaced it and it worked temporarily, what may be placing excess strain on it?

      Comment

      • Audioplus
        Senior Member
        • Feb 2012
        • 157
        • USA

        #4
        Re: LG 47LB5D No Pic, has audio & backlight

        Another associate commented that the ribbon cable to the power invertor for the panel creates issue sometimes, may be a little pressure and some hot glue resolves?
        Any comments?

        Comment

        Related Topics

        Collapse

        • triplefour
          UN65TU700DF picture and sound but no backlight. BL tests ok but repl. PSU didnt fix!
          by triplefour
          this tv is throwing me for a loop. do samsung tvs no longer have the backlight self test feature built into the power supply?
          i tested the backlight with my LED tester and it lights up both strips. one of them reads 100v and the other reads 63.7v.
          unplugged mainboard from power supply but left backlight plugged in, and then plugged psu wall power in. expected to see backlights light up but see nothing.
          according to how ive diagnosed in the past, this would almost always be a bad power supply. replacement power supply was cheap like 20$ from ebay. but still i get not even...
          09-13-2023, 10:43 PM
        • signal.quest
          Panasonic LED TV TC-40A420U - Replaced Backlight LEDs but now no image/display or garbled
          by signal.quest
          I have a Panasonic LED TV TC-40A420U. The TV was given to me as an attempt to fix or throw out. I replaced the Backlight LEDs and now the screen lights up, but there is no image/display. If I play with the up/down buttons I can get the display to change from black to garbled. I can't get sound from HDMI but not sure of what input is selected. I have no remote control. When I connect a laptop to the HDMI ports it recognizes a Panasonic TV for display and sound output but I can't see or hear anything through the TV. This makes me think the mainboard is OK, but not sure if mainboard can...
          03-17-2024, 10:14 AM
        • JaquesPratt
          Vizio D32f-E1 Powers on, has backlight, won't boot/no logo, no menu or video
          by JaquesPratt
          I have a Vizio D32f-E1 LCD TV that does NOT have a TCON board.

          This TV recently went through some 'death throes' and now won't boot. The first problem that began to manifest was while watching tv, the screen would 'freeze', and the image would dim over a few seconds until it was very dark. HOWEVER, the audio of the show would continue as normal. I could power off the TV for 5-20 seconds, power back on, and the video would be normal. This would occur 1-3 times when the TV was first started, and would not happen again after the TV was 'warmed up'. Not ideal, but this glitch was manageable....
          07-16-2024, 01:04 AM
        • shelby5041
          Samsung LCD TV no picture backlight on no 12v at tcon
          by shelby5041
          hi
          i have a samsung lcd tv

          it powers on with sound and backlight but no picture

          all voltages from PS are good 12v 3.3v and 5v

          whats odd is that at the tcon i tested voltage across the fuse on the tcon and i get 0v

          i figured main board issue..so i ordered a used main board....when i put replacement main board in i still have same issue

          no 12v at the tcon fuse

          i disconnect the panel ribbon cables to rule out any panel issues and i still have no 12v at the tcon fuse

          the odds of having 2...
          10-08-2021, 08:21 AM
        • samson7point1@yahoo.com
          Help troubleshooting an audio problem with an RCA SGT-250 CED Player
          by samson7point1@yahoo.com
          The Problem: This player has a toggle switch to select between Stereo, Mono R, and Mono L. Regardless of the setting it outputs the sound to both the L&R audio jacks. In the Mono R position, the audio output level is normal (from both the L and R audio output jacks), in the Stereo position the audio output is about half the volume, and in Mono L, it's about 3/4 the volume. Something about putting it into Stereo mode is causing the volume to drop significantly and I can't figure it out.

          The player processes the audio signal using two different reference frequencies. The "R"...
          04-30-2024, 11:22 AM
        • Loading...
        • No more items.
        Working...