XVT323SV No HDMI,No WIFI, No bluetooth address

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Grengadgy
    Member
    • Feb 2015
    • 10
    • USA

    #1

    XVT323SV No HDMI,No WIFI, No bluetooth address

    I'm new here but need some help. my vizio XVT323SV cut off today (flashing reboot thingy). It shows NoBluetooth address, wireless doesn't work and on setup it won't show any HDMI inputs(only shows antenna, AV and RBG). It won't show any devices(Kind or brand). I can only use coax, av and maybe rbg inputs. I can use VIA on ethernet cable but can't use NETFLIX or AMAZON
    (they are pre-programmed). Crackle works when I download it from the App Store. I can watch DISH and locals on antenna input. On setup lt only shows Antenna/cable, av and rbg lnputs. I haven't taken any voltage readings because to me it looks like it lost memory/programming. I tried factory and hard resets

    Any ideas? Thanks for any thoughts. All of this happened after a flashing reboot .
  • Grengadgy
    Member
    • Feb 2015
    • 10
    • USA

    #2
    Re: XVT323SV No HDMI,No WIFI, No bluetooth address

    Maybe flashing reboot was a bad usage of words. I wasn't trying to flash the memory rather Vizio was doing it's daily restart. This time
    it didn't restart right.

    Would taking voltage reading help or simply replace a card. If so which card, maincard? Thanks
    Last edited by Grengadgy; 02-25-2015, 07:02 AM.

    Comment

    • Grengadgy
      Member
      • Feb 2015
      • 10
      • USA

      #3
      Re: XVT323SV No HDMI,No WIFI, No bluetooth address

      No thoughts? Does all of these problems point to the main board? It has a great picture on antenna but I can't use my hdmi inputs and no wifi is found.

      Comment

      • Grengadgy
        Member
        • Feb 2015
        • 10
        • USA

        #4
        Re: XVT323SV No HDMI,No WIFI, No bluetooth address

        Has anybody ever seen problems similar to this on any Vizio?

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #5
          Re: XVT323SV No HDMI,No WIFI, No bluetooth address

          Seen issues on other smart TVs, it's generally caused by corrupted firmware. The TV might allow you to update via USB, but it's risky as trying to update corrupted firmware could cause further issues.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • Grengadgy
            Member
            • Feb 2015
            • 10
            • USA

            #6
            Re: XVT323SV No HDMI,No WIFI, No bluetooth address

            Thanks for the reply. I have seen instructions on flashing the firmware via pendrive but have been unable to find any firmware. Replacing the main board would probably fix this problem?

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK

              #7
              Re: XVT323SV No HDMI,No WIFI, No bluetooth address

              Yes replacing the main board should fix the issue. But Vizio main boards are expensive, because they fail so often.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • Grengadgy
                Member
                • Feb 2015
                • 10
                • USA

                #8
                Re: XVT323SV No HDMI,No WIFI, No bluetooth address

                Thanks Tom,

                Comment

                • georgi
                  New Member
                  • Aug 2014
                  • 4
                  • usa

                  #9
                  Re: XVT323SV No HDMI,No WIFI, No bluetooth address

                  Hi also I have this same tv , but with different problem, I hope you guys can help me,
                  vizio XVT323SV
                  with no 12 volts
                  only 5 volts for stb,

                  Comment

                  • budm
                    Badcaps Legend
                    • Feb 2010
                    • 40746
                    • USA

                    #10
                    Re: XVT323SV No HDMI,No WIFI, No bluetooth address

                    Originally posted by georgi
                    Hi also I have this same tv , but with different problem, I hope you guys can help me,
                    vizio XVT323SV
                    with no 12 volts
                    only 5 volts for stb,
                    Please start a new thread, put the make, model, symptom in the Title, and up load good clear pictures of the boards and the whole back side of the TV showing all the boards.
                    Never stop learning
                    Basic LCD TV and Monitor troubleshooting guides.
                    http://www.badcaps.net/forum/showthr...956#post305956

                    Voltage Regulator (LDO) testing:
                    http://www.badcaps.net/forum/showthr...999#post300999

                    Inverter testing using old CFL:
                    http://www.badcaps.net/forum/showthr...er+testing+cfl

                    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                    http://s807.photobucket.com/user/budm/library/

                    TV Factory reset codes listing:
                    http://www.badcaps.net/forum/showthread.php?t=24809

                    Comment

                    Related Topics

                    Collapse

                    • STKR123
                      Elitebooks (820, 840 etc. all gens) and those continuously flashing Power LED + flashing CapsLock LED
                      by STKR123
                      As the Elitebooks (820, 840 all gens) only show flashing Power LED and flashing CapsLock (continuously) + a very soft "ticking" noise near the DC Jack,
                      I wonder if re-flashing the BIOS might be of any use here.

                      As far as I understood, steady flashing either means insufficient power or a CPU/GPU/Motherboard issue. I use the original 65watt power supply.

                      There are so many threads out there, but most of the solutions involve flashing codes, which I dont have or claim that you MUST use the original power supply, do a hard reset, reseat the RAM, clean the RAM,...
                      11-03-2024, 06:58 AM
                    • spice_disc
                      Vizio TV M50-C1 reboot cycle and static on screen
                      by spice_disc
                      I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                      The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                      09-08-2024, 02:37 PM
                    • learnmore
                      Samsung QE55Q60TAUXXU - flashing backlight and flashing standy light--no image
                      by learnmore
                      Hello Community!

                      CASE DETAILS

                      Promblem Signs: Backlight on 1 sec off 7sec > repeat && Red standby light: 1blink, off 3 sec, 2 blinks, off 5 secs, 2 blinks, off 3 sec, restart cycle

                      13V present on powerboard output. Backlight continues flashing after removing cables to pannel one at a time and even with both disconnected. NOTE: backlight STOPs flashing and remains on when connector between powerboard and mainboard (note Tcon built in) is disconnected.

                      Tried inserting firmware on USB and left it in for a few hours, but no change
                      ...
                      03-03-2024, 09:49 AM
                    • H34TO
                      ITE IT8390 (IT8390E-256) programmer "ITE Download Board 4" user manual + firmware, flashing ITE ECs on the cheap
                      by H34TO
                      Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...
                      06-17-2025, 07:17 AM
                    • ianasystems
                      Need Help Restoring BIOS and MAC Address for HP ProDesk 600 G1 SFF
                      by ianasystems
                      Hello,

                      I'm currently dealing with a BIOS corruption issue on my HP ProDesk 600 G1 SFF desktop PC.

                      After the BIOS got corrupted, my PC was showing no display, and I had to take it to a repair shop where the technician removed the BIOS chip from the motherboard and installed a BIOS I provided from a file I downloaded from the official HP website.

                      While the display issue was fixed and the system is powering up again, there's one major problem: the Ethernet MAC address is now showing as FF:FF:FF:FF:FF:FF, indicating that it's been wiped or corrupted as well....
                      04-16-2025, 02:04 PM
                    • Loading...
                    • No more items.
                    Working...