No Power Emerson LC320EM2

[joshbsg]

I had the same fuse blowing problem as others. Best I could tell I only had 3 bad components on the primary circuit. They were (1) MOSFET Q600, (1) ZENER DIODE D610, and (1) SCHOTTKY DIODE D640.

D600-D603 all tested good.

After replacing the parts I now get no power or signs of life whatsoever. No indicator light or clicking, nothing.

Any suggestions?

[CapLeaker]

Re: No Power Emerson LC320EM2

I've repaired one of those. I am sure that there is more bad than that. some parts you have to lift one leg and recheck.Read that thread:
https://www.badcaps.net/forum/showth...hlight=emerson