Announcement

Collapse
No announcement yet.

samsung PS50A558S1F 50" plasma clicking and no picture

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    samsung PS50A558S1F 50" plasma clicking and no picture

    hi my samsung PS50A558S1F is just clicking overtime i plug in the power lead...

    it does a serious of clicks 5 times like 12....3.

    then it goes to standby and the red led at front lights up..

    you can then use the remote to switch it on but you get no picture..

    the led light responds with the remote but still no picture which ever button i press on the remote

    it also has a low volume high pitch hissing noise

    please can someone help me out here...i have read into this a lot and getting no where..i don't have any bulging capacitors

    thanks
    luke
    Tags: None
    #2
    Re: samsung PS50A558S1F 50" plasma clicking and no picture

    read the first post in this category, try to put up some good clear in focus pics. of each board and one of how they are all connected, careful when working with power supply, HIGH VOLTAGE, on primary side, can be deadly.

    Comment

      #3
      Re: samsung PS50A558S1F 50" plasma clicking and no picture

      apologies
      Last edited by luke6666; 01-03-2015, 08:00 AM.

      Comment

        #4
        Re: samsung PS50A558S1F 50" plasma clicking and no picture

        here you go
        Attached Files

        Comment

          #5
          Re: samsung PS50A558S1F 50" plasma clicking and no picture

          ok, we got a good start, I'm not too good with plasma, but the other guys really know their stuff.

          Comment

            #6
            Re: samsung PS50A558S1F 50" plasma clicking and no picture

            hopefully this will be a simple and easy fix!!!

            Comment

              #7
              Re: samsung PS50A558S1F 50" plasma clicking and no picture

              No one able to help?....any help would be much appreciated!

              Comment

                #8
                Re: samsung PS50A558S1F 50" plasma clicking and no picture

                well maybe start with checking anything on the boards labeled F, F=fuse, remember careful of the high voltage.

                Comment

                  #9
                  Re: samsung PS50A558S1F 50" plasma clicking and no picture

                  Try checking Vs and Va volts on power supply outputs.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                    #10
                    Re: samsung PS50A558S1F 50" plasma clicking and no picture

                    hi thanks for the reply..the fuses are all fine.
                    Last edited by luke6666; 01-04-2015, 10:40 AM.

                    Comment

                      #11
                      Re: samsung PS50A558S1F 50" plasma clicking and no picture

                      i will check the va and vs as soon as i get a multimeter..the one i have doesn't tell me the volts

                      Comment

                      Previous template Next
                      Working...
                      X