Re: Stumped on Samsung PN60E530A3F
Reading the datasheet I see it indicates the cap for the blanking time Cbk is restricted to less than 0.65uf.
The cap in the board is a 10uf, could this be the problem? Was also wondering about the resistor on CS pin.
Will check voltage @ power on and let you know.
Reading the datasheet I see it indicates the cap for the blanking time Cbk is restricted to less than 0.65uf.
The cap in the board is a 10uf, could this be the problem? Was also wondering about the resistor on CS pin.
Will check voltage @ power on and let you know.
Comment