From the time its plugged in there is a blue light, then when you press the power button the light blinks once then solid blue again but never powers on. No obvious issues with the power supply.
-
Last edited by Gadjet; 12-06-2014, 06:22 PM. -
-
Hi everyone, I have a Nintendo 2DS XL that shows the orange charging light when plugged in, but nothing happens when I press the power button — no blue light, no screen, no sound.
Here's what I've observed:
All ribbon cables are properly connected
Battery is present and in good condition
No reaction even with screens disconnected
There's a visible burn mark / overheating sign on the metal shield, right above the CPU
I’m suspecting an issue with the CPU, PMIC, NAND, or a power... -
proscan 40ld45q
Have tried published resets with no help. (unplug for 10, push on-off for 30, push menu and vol +, etc.)
After being plugged in, red light comes on. Push power button and blue light comes on for ~five seconds then goes out. Power button does not turn the unit on a second time - have to unplug/re-plug before power button will try to start with blue light.
No sound, no picture (used flashlight test).
No bulging cap, no burn spots, no burn smells, nothing visual (cold joints/breaks/bugs).
Digital voltmeter;... -
This specification for the HP EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera boardview and EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our...09-12-2024, 02:00 PM
-
Hi, I am waiting for my uart tool so I can grab an error code and narrow down where my issue is, but I decided to measure capacitors and fuses to insure everything was okay.
The PS5 turns on with a blue light and a beep for 1-2 seconds then turns off. I noticed a grey capacitor measures no voltage on standby or input power. Does this indicate a problem with the capacitor or something down on the line? I’m getting 3.3v on input with the red cap next to the grey one, and 5.2v on input with the red cap further away from the grey cap.
Thank you for any input... -
Synology DS918+
Model name : GDI41L2
p/N: 08-06GDI4116
Version: V1.6
Problem : blue light blink...05-24-2025, 11:53 PM
Comment