Insignia reset?
I was given an Insignia NS-46L400NA14,when plugged in it would automatically try to turn on, flash a red led 6 times and then nothing. So I unplugged it and held the power and input buttons then plugged it back in and guess what? It came back to life! Let me know if it works for anybody else.
-
Hello, sorry for the long post, I just wanted to include any details that might help.
A bit of backstory - I currently have 5 of these MiniPCs - I got them for very cheap from Ebay. All of these PCs are BIOS administrator password locked without their drives.
I also got a G3 large tower, that I could reset the password of fine just using a header and a button on the motherboard.
So I thought that I could do the same with the G4 MiniPCs, oh how wrong I was.
First of all, I stumbled upon a tutorial, that apparently showed a BIOS password reset procedure - where I basically... -
I just got this tv today and it's getting stuck on the wallpaper. When I first power it on it goes to the V logo, then a black screen for about 15 seconds, then a Chromecast error for just a few seconds, and then finally to a wallpaper. It stays frozen on this wallpaper and does not respond to anything on the remote besides power on/off. Likewise the buttons on the tv do nothing either (besides power). I did the "reset" by holding the volume down and input buttons together for 10 seconds. It showed a message at the top of the screen saying it was Wiping Data and would restart soon. After... -
Hi all
I have anoying problem after resetting my blackview bv9900 phone doesn't find google drive my phone back&ups anyymore also doesn't make new back-ups from my phone anamore. Does anyone know why it happens and how i can fix it . I will not like to lose my data again. Also back-up button is grey out see picture.
Regards Steve...07-22-2022, 03:37 AM -
This happened last Saturday and today I finally had time this morning before I went to work to replace two non brand capacitors
I will let you be the judge weather or not these are bad or not according to the blue ESR meter that I am using
I am comparing them to a brand new one that I installed
The display came back on and the programming was not lost which I was surprised by I would have thought that when the display went blank that so did the memory as well
I going to let it run for several days before I remount back on the wall next to the... -
I am a hobbyist (not a professional) so please be gentle...
I recently received an XR-77A80J that wouldn't turn on. (Repeating 5 flashes when plugged in.)
I did a hard reset by holding the power button for about 30 seconds until the set powered down. I then tried to turn it on and it powered up, bringing me to the setup screen. There's not a lot of detail on the setup screen but the picture didn't have any distortions, so at least a cursory examination suggests no physical damage to the screen. The set appeared to be working normally, but it shut down after about 15 seconds,...