I would say TCON if you weren't getting the noise out of the speakers. Still possible it could be some interference from the bad tcon causing it, I suppose. Can you unplug the LVDS cable at the bottom of the tcon and see if the sound persists?
Unplugged the LVDS and the screen turns on BLACK, no horizontall lines and no picture (due to the unplugged LVDS) the noise from the speakers is still present and it doesnt change whether I tunr the volume down or up.
I noticed there is a capacitor on the controller board (the one where the inputs go)... I did not replace it since it is a SMD capacitor, even though I managed soldering it on a few other boards. I will replace it just in case even though it is not bulged.
Comment