need help..common capacitor values for lcd tvs????

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • shelby5041
    Badcaps Legend
    • Feb 2009
    • 1504
    • united states of america usa
    #1

    need help..common capacitor values for lcd tvs????

    hi i was wondering if anyone could give me some more common lcd tv caps to add to my list of inventory.......these are what i have..am i missing any other common ones???....i want to make an order from digikey but would like to make sure i have most of the common repair job caps in lcd tvs so i have them on hand when trying to fix lcd tvs.....im not worried about the voltage or size....just the capacitance values .....thank you

    33uf
    47uf
    220uf
    330uf
    470uf
    680uf
    820uf
    1000uf
    1200uf
    2200uf
    3300uf
    Tags: None
    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA
      #2
      Re: need help..common capacitor values for lcd tvs????

      Those are what I stock for repair plus 22uF, 56uF, 100uF, 1500uF.
      For 22, 33, 47, 56 I stock 50V version only.
      The others I stock 10V, 16V, 25V, and 35V
      Last edited by budm; 10-23-2014, 03:27 PM.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • shelby5041
          Badcaps Legend
          • Feb 2009
          • 1504
          • united states of america usa
          #3
          Re: need help..common capacitor values for lcd tvs????

          awesome.....thats great info....now i can make an order...

            Comment

            Previous template Next

            Related Topics

            Collapse
            • proxneo
              Recapping Sony ICF-SW55 - verifying cap values
              by proxneo
              Dear reader

              I am performing a repair on a Sony ICF-SW55, which includes recapping (some) of the SMD capacitors on the mainboard. I am looking for verification of their values. At the moment, I'm 95% sure I've got the right values, but it is hard to find some official, credible or multiple independant sources on this.

              At the moment, I have selected replacements based on the following list of values:

              3 x 470uF 10VDC
              3 x 4.7uF 35VDC
              4 x 47uF 50VDC
              8 x 22uF 6.3 VDC
              1 x 220uF 6.3VDC
              5 x 100uF 6.3VDC

              Which...
              06-21-2023, 12:38 AM
            • mrkmpn
              Capacitor values in boardview
              by mrkmpn
              I am trying to determine the value of a blown capacitor, and the boadview shows the values for many of the capacitors and other components on this board, but all of the information blank on others.

              Is there any relevance to the fact that some of these values are left out, or is it just inconsistency by whoever created the boardviews?

              Is there any way to deteremine if one without infrormation matches one that shows those details?
              05-25-2022, 12:03 PM
            • chth96
              If I replace with inferior capacitor, Is it No harm to other IC components at all?
              by chth96
              I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
              Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
              It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
              So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
              I know that these capacitor will not last as long as nichicon capacitor...
              12-22-2023, 04:34 AM
            • chth96
              How can I test non-polarized capacitor?
              by chth96
              I desoldered samwha NF capacitor(50v 5.6uf) from PCB circuit of 29inch CRT TV which have symptoms of no display after I heard sound of inrush of current to TV whenever I switch on this television.
              I measured ESR value of this non-polarized capacitor(samwha NF capacitor 50v 5.6uf) by means of MESR-100 ESR meter and It displayed 0.3 ohm

              And When I measured its capacitance with digital multimeter and LCR-T4 Mega328 meter, It displayed 10uf from DMM and 8uf from LCR-T4 meter.
              I found catalogue of samwha capacitor(samwha-catalogue_3.pdf file), which is attached to this thread,...
              06-02-2024, 07:31 PM
            • chth96
              Is it no harm to replace with capacitor without ripple current rating?
              by chth96
              When I tried to repair LG 29 inch CRT TV, I found that the ESR value of samyoung SMS capacitor(160v 2.2uf), which is very close to D1879 transistor, is 6 ohm.


              Judging from above ESR Meter Table,I think It is necessary to replace this sms capacitor.So I visited local electronics shop,and I purchased 160v 2.2uf rubycon YK capacitor.
              But when I browse through rubycon YK datasheet,I found that there is no ripple current rating for 160v 2.2uf specification. But On the contrary, I found 39 mA ripple current rating for 160v 2.2uf SMS capacitor.
              Rubycon YK DataSheet (b...
              04-19-2024, 05:19 AM
            • Loading...
            • No more items.
            Working...