Is this the right part?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Josephmichael09
    New Member
    • Oct 2014
    • 8
    • United States
    #1

    Is this the right part?

    Model number of the tv I have is lc-42sv49u
    The part number on the main board is 492a01521300r. I found a part online with the same part number but the description says it's for another tv... The parts look the same but idk if it's the right part.

    Here is the link to the part
    http://populargadgetsale.com/index.p...product_id=619

    Help please
    Tags: None
    • tw2005
      Badcaps Legend
      • Oct 2011
      • 6458
      • Australia
      #2
      Re: Is this the right part?

      Tough one especially since I don't have experience with these.

      795951300500R looks like the part number on the sticker. I'd run with that number because 492A01521300R appears to be the PCB number which may have several revisions.

      Jump onto SJ and try searching these numbers and models.

      I saw 492A01521300R for 32" and the 42" model you say advertised too which I'd be wary.

      Maybe ask for the number on the orange sticker and see if that lines up with yours.

      maybe the board can be reconfigured for a few panels within the service menu if that's accessible but i'm assuming now.

      really need a comment from someone who's worked on the sharp.

      Other than that not 100% sure what to advise

        Comment

        • Josephmichael09
          New Member
          • Oct 2014
          • 8
          • United States
          #3
          Re: Is this the right part?

          This if the photo that I have from my board.
          The second picture is the PS. Unfortunately I took off the sticker in the power supply.
          Attached Files

            Comment

            • Josephmichael09
              New Member
              • Oct 2014
              • 8
              • United States
              #4
              Re: Is this the right part?

              This if the photo that I have from my board.
              The second picture is the PS. Unfortunately I took off the sticker in the power supply
              Attached Files

                Comment

                • Josephmichael09
                  New Member
                  • Oct 2014
                  • 8
                  • United States
                  #5
                  Re: Is this the right part?

                  So I'm trying to upload the pictures from my phone as it's giving me troubles but the first photo is the power supply and the second is the main board

                    Comment

                    • tw2005
                      Badcaps Legend
                      • Oct 2011
                      • 6458
                      • Australia
                      #6
                      Re: Is this the right part?

                      Me , I'd consider sending an inquiry stating the model, the pcb number and what's on the sticker to the seller and have them verify theirs matches and if it turns out to be incompatible will they take it back with no restock fee.

                        Comment

                        • budm
                          Badcaps Legend
                          • Feb 2010
                          • 40746
                          • USA
                          #7
                          Re: Is this the right part?

                          "796051300500R" go by the P/N on the barcode sticker which is the PCBA (Printed Circuit Board Assembly- board that is stuffed with parts need for certain model, same blank board can be stuffed in many different way for needed modles)
                          http://www.shopjimmy.com/sharp-9jy79...lc-42sv49u.htm
                          Never stop learning
                          Basic LCD TV and Monitor troubleshooting guides.
                          http://www.badcaps.net/forum/showthr...956#post305956

                          Voltage Regulator (LDO) testing:
                          http://www.badcaps.net/forum/showthr...999#post300999

                          Inverter testing using old CFL:
                          http://www.badcaps.net/forum/showthr...er+testing+cfl

                          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                          http://s807.photobucket.com/user/budm/library/

                          TV Factory reset codes listing:
                          http://www.badcaps.net/forum/showthread.php?t=24809

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • esinior
                              Smd code to part number
                              by esinior
                              Hi i have a smd part with probably mark "QO 11" or "Q0(zero) 11" on it, and its package is SOT89, i doubt its KTB1260 PNP transistor, but in measuring with diode mode of multimeter it shows number 1.4 between emitter and collector pins and its not open circuit, and .59 from collector to base and .8 from emitter to base , and these numbers doesn't match a pnp transistor, i couldn't find any part number and datasheet for it, does anybody have information for that part number?
                              I've attached pics of this part
                              Thanks...
                              4 Photos
                              08-20-2024, 02:50 AM
                            • Yanleb
                              Panasonic part number in service manuals
                              by Yanleb
                              In the Panasonic service manuals, both in the board schematics and in the part listing, the part numbers that are given are Panasonic part numbers instead of the actual part numbers.

                              This is especially annoying for small SMD components like diodes and transistors when you only have 1-3 digits printed on the component body.

                              For an example, look at the attached PDF.

                              Do you have a way to cross reference the Panasonic part number with the actual part number?

                              Thanks....
                              07-03-2023, 08:16 PM
                            • Steph.hen
                              Bridge rectifier identification part number KPB305G
                              by Steph.hen
                              Hi all, a newby question about a bridge rectifier I'm trying to identify.

                              I'm in the midst of reparing a battery charger in work which went pop, The bridge rectifier has shorted and took out a couple of other components. The rectifier in question has a part number KPB305G, and it looks like it's obsolete. Does any one know what I could replace it with?...
                              08-29-2024, 09:52 AM
                            • tech_guru
                              Cannot find PS5 IC (marking F2=8D) part number
                              by tech_guru
                              Hello everyone.
                              Is there any chance somebody can find the part number of this chip or equivalent, in the attached photo?
                              It is from PS5 EDM-020 board, in the front usb section, near F3502.
                              It must be a Richtek ic, vqfn32 package style.
                              Thank you in advance....
                              05-27-2024, 01:37 AM
                            • edugimeno
                              Finding the wrong part at a loooong led strip, part works fine, part flickers, all parallel...
                              by edugimeno
                              Hi There!
                              I'm trying to help my friend who owns a restaurant be just bought.
                              He has a very long LED strip running along all the walls and columns. The strip is attached facing down 2in above the floor, using a wall panel that ends in a metal rail that finishes the panel underneath
                              It's stuck using, I guess, the 2 sided tape that comes with the strip
                              The issue is that like 1/2 of the full length, including 1/2 one wall, another entire wall, and one column, flickers after 4 or 5 minutes ON. Particularly it flashes staying OFF most of the time and flashing ON for 1 tenth...
                              09-05-2024, 09:34 AM
                            • Loading...
                            • No more items.
                            Working...