Announcement

Collapse
No announcement yet.

Phillips LCD TV 47PFL7403/F7 has sound but looses picture/B.L. after a short while

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Phillips LCD TV 47PFL7403/F7 has sound but looses picture/B.L. after a short while

    I have a Phillips 47PFL7403/F7. The two Large main capacitors on the power supply board are bulging and hot.
    TV Symptoms are: TV turns on and plays for several minutes normally. Then the picture disappears but the sound remains. Problem will repeat if turned off then on.
    Have you heard of this problem before ?
    I am hoping that replacing the largest main high voltage capacitors 450v 150uf Panasonic Series TS-ED capacitors I think, (in the center of the PS PCB) will correct the issue,
    I hope its not the inverter board also.
    All other capacitors look normal.

    I am a tech and only need any advice you can provide. I have not seen this specific TV problem on a LCD Phillips before. I rarely see Phillips TV's.
    Not sure if I have one problem or two.
    Anyone who has had experience with SOLVING this issue please reply.
    MRGCAV@gmail.com
    .
    Similar thread but no solution:
    https://www.badcaps.net/forum/showth...ht=phillips+tv
    Last edited by mrgcav; 10-04-2014, 04:12 PM. Reason: typo

    #2
    Re: Phillips LCD TV 47PFL7403/F7 has sound but looses picture/B.L. after a short whi

    I had what was a similar issue to yours with a led sanyo dp46142, got another inverter/driver board and had the same issue, I'm trying to narrow down how to test, and determine if I need to get a new powerboard. I got all excited thinking I'd be some help troubleshooting but it seems your about the same spot I am... lol


    Comment

    Working...
    X