Another possible buy? Help me out BadCaps! :D
Picture is below, Model number is unknown - I just texted the guy to find out - will update when I get it.
Attached Files
-
-
Re: Another possible buy? Help me out BadCaps!
Bad Panel, is that a PDP or LCD?
Looks like my PDP 5084 bezel. Can you ask the seller if those lines are stagnate or move around with the picture?Last edited by Shinju; 09-15-2014, 09:59 AM. -
Re: Another possible buy? Help me out BadCaps!
it is a LN52A530P1F if that helps, I will askComment
-
Re: Another possible buy? Help me out BadCaps!
According to him they stay the sameComment
-
Re: Another possible buy? Help me out BadCaps!
LCD, its probably 90% bad panel, how much?Comment
-
Re: Another possible buy? Help me out BadCaps!
He wants $50, but its an hour + awayComment
-
Re: Another possible buy? Help me out BadCaps!
Money to be made on parts, but eh hour away = time and money too.Comment
-
Problem
This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached.... -
I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.
For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).
https://www.badcaps.net/filedata/fetch?id=3591771
https://www.badcaps.net/filedata/fetch?id=3591772
It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:
https://www.badcaps.net/filedata/fetch?id=359177... -
I have here a Magnum IA.100 which belongs to my parents.
The unit powers on & when the relay kicks in, you get a pop from the speakers (this might sound weird but is usual behavior for this amp). However, you get nothing coming through it from any of the inputs & no pops and crackls from any of the controls.
Because of the sound from the speaker when the amp turns on I have assumed that the output section probably works but I could be wrong & I'm not sure how to test that side of things further.
What Ive done........01-01-2025, 01:26 PM -
Copying DMI information from an old bios to a new one is difficult for some members, often they have no experience with a hex editor,or some that have tried find it too hard.There is an option to make things easier for those members so that they don`t need to post their own bios backup for the DMI copying.
Experienced bios modding members can help by posting in other threads the DMI offsets,macro script generated by the software and a download link to the software at softpedia mentioned in this guide,or post your macros in the comments here with a link to the bios request thread .... -
outputs available on the power card 5v 12v . The power light stays on when the screen is not plugged in. but when you put the flex on the screen. power light starts blinking. The 5v output moves between 4.6-5.0.. where can this problem come from.not have badcaps. everything looks normal.I plugged in another screen again same problem to continue
Comment