le46s86bd resistor value help

[wreksta]

hi all I need a lil help got a tv in last night it had been badly repaired
im talking that bad the 150uf 450v caps had both blown also a 20n60c3 mosfet and 2 resistors now the resistors is the problem

the board is meant to have 2x 5w r15k ceraminc type

I don't have any of these I do however have a few 5w 10j ceramic type could I use these please help and I can then test this tv

[tom66]

Re: le46s86bd resistor value help

What's BN44 number of PSU?

R15K = 15 kohm
10J = 10 ohm

Pretty large difference....

[wreksta]

Re: le46s86bd resistor value help

bn4400166a

mate cheers for the help

[tom66]

Re: le46s86bd resistor value help

I've the 166C - maybe similar enough


What's component designation for resistors in question? (e.g. R12345)

[wreksta]

Re: le46s86bd resistor value help

hi tom I don't understand that question please explain

I used a 5w r12k and a 5w 10j
but my fuses fs801 and fst02 blew would that be down to this

also the mosfet that it had in was a 20n60c3

I changed that for a sd20n60 would that be a problem

please assist

[tom66]

Re: le46s86bd resistor value help

On the PCB (the board) there will be a LABEL (Reference Designator / RefDes) like R12345 printed next to the component. It will match up with the schematic. That label is necessary to figure out what the component should be and what it does.