le46s86bd resistor value help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wreksta
    Badcaps Veteran
    • Aug 2013
    • 508
    • england
    #1

    le46s86bd resistor value help

    hi all I need a lil help got a tv in last night it had been badly repaired
    im talking that bad the 150uf 450v caps had both blown also a 20n60c3 mosfet and 2 resistors now the resistors is the problem

    the board is meant to have 2x 5w r15k ceraminc type

    I don't have any of these I do however have a few 5w 10j ceramic type could I use these please help and I can then test this tv
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: le46s86bd resistor value help

      What's BN44 number of PSU?

      R15K = 15 kohm
      10J = 10 ohm

      Pretty large difference....
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • wreksta
          Badcaps Veteran
          • Aug 2013
          • 508
          • england
          #3
          Re: le46s86bd resistor value help

          bn4400166a

          mate cheers for the help

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK
              #4
              Re: le46s86bd resistor value help

              I've the 166C - maybe similar enough


              What's component designation for resistors in question? (e.g. R12345)
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • wreksta
                  Badcaps Veteran
                  • Aug 2013
                  • 508
                  • england
                  #5
                  Re: le46s86bd resistor value help

                  hi tom I don't understand that question please explain

                  I used a 5w r12k and a 5w 10j
                  but my fuses fs801 and fst02 blew would that be down to this

                  also the mosfet that it had in was a 20n60c3

                  I changed that for a sd20n60 would that be a problem

                  please assist

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK
                      #6
                      Re: le46s86bd resistor value help

                      On the PCB (the board) there will be a LABEL (Reference Designator / RefDes) like R12345 printed next to the component. It will match up with the schematic. That label is necessary to figure out what the component should be and what it does.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • TinkerTron
                          Schematic vs. Reality: Where Are the Resistors on My Sharp Clock Radio? Model FY-70CH
                          by TinkerTron
                          Hey everyone,

                          I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.

                          Instead, here's what's been bugging me so far:
                          The schematic...
                          3 Photos
                          03-06-2025, 02:03 PM
                        • artvandalai
                          What resistor ohm will work better to repair this waterpik?
                          by artvandalai
                          The resistor on this waterpik blew. I changed it with the a similar spec 47ohm 2 watt yageo resistor but it still keeps blowing the resistor. Checking with the multimeter the motor, capacitor, diodes, and thermal fuse all checked normal. Will a higher ohm resistor work better? What ohm resistor will work better to repair this waterpik? This video is showing the repair with a 56 ohm resistor https://www.youtube.com/watch?v=_J7_rV7ui1Y
                          3 Photos
                          01-05-2025, 04:10 PM
                        • chth96
                          Is it okay to replace 1/2 watt resistor with 1 watt resistor in AC/DC adapter?
                          by chth96
                          I have purchased an 100-240v AC/5v 2a DC adaptor from aliexpress,and a month ago It smelled burning when I plugin it powerstrip.
                          Since then, This AC/DC adaptor have been out of order.
                          But A few days ago,I replace 0.5 watt resistor with 1 watt resistor(1ohm) in this adapter.
                          After replacing resistor,It succeed to recharge all of android phone.And When I measure voltage on the two pins of USB port,It shows 5.5v
                          Is it okay to replace 1/2 watt resistor with 1 watt resistor in AC/DC adapter?
                          And Is there any possibility that it will suddenly explode as well as to be out...
                          12-03-2023, 04:40 AM
                        • flat-earther
                          Hoover FM216LI cordless vacuum refuses to charge
                          by flat-earther
                          I have a Hoover FM216LI cordless vacuum which isn't charging its internal battery.

                          I opened up the unit, and it has 6x Samsung ICR18650-22P cells connected in series.
                          5 cells were at about 3.3-3.1V. one was at 2.4V, so I assumed this cell was bad that's why the vacuum wasn't charging so I replaced it with another 18650, but after that the problem still persists, the vacuum turns on a bit and then cuts out since the batteries are empty.

                          So I think the over discharged battery wasn't the culprit, it was a symptom of the unit not being able to charge its batteries....
                          06-06-2025, 03:14 AM
                        • badcap111
                          Xiaomi mi 9T missing resistor
                          by badcap111
                          Hi, while trying to replace a broken screen connector on the motherboard, I knocked off a resistor next to the connector, and the resistor vanished. I have tried to find out the value of the resistor by looking at the schematics, but I cannot find the value. The ID of the resistor, or what you should call it, is R6400.

                          I don't know if the resistor is necessary for the phone to function, and the connector is still not soldered on to motherboard. I have contacted Xiaomi and asked them if they know the value, but they want a proof of purchase, which I don't have.

                          Is...
                          08-07-2023, 10:42 AM
                        • Loading...
                        • No more items.
                        Working...