Pioneer PDP436pe+media reciverr06fe

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kobkobk
    Member
    • Sep 2011
    • 28

    #1

    Pioneer PDP436pe+media reciverr06fe

    Dear Friends
    I have a Pioneer PDP-R06FE MEDIA RECIVER
    AND MONITOR PDP-436PE
    Recently the volume hike up the monitor turns off and the red light is on and MEDIA RECIVER blue LED blinks six times cycles
    Also you can not turn on the monitor again only after turning off the main switch
    Please if anyone encountered this problem I would be happy if you can help or give direction
    I hope all this is true translation in English source
    Thanks in advance for your help
    Kobi

Related Topics

Collapse

  • momaka
    HannStar Hanns-G HC194d LCD monitor repair
    by momaka
    Normally, I never post repairs this quick after I do them, because… I am usually very slow. But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
    03-15-2023, 10:17 PM
  • keepread
    Dell monitor PSU vs Dell laptop PSU
    by keepread
    Hi there!
    Someone gave me their old monitor, it's Dell S2715ht.
    The owner was using it when his PSU began to smell and then to smoke. It literally began to melt. He turned the monitor off, pulled the PSU, and ditched it because it was smelly even after it cooled. So I got the monitor but not the plug.
    Now, I tried to bring the monitor back to life, by plugging one of my many Dell laptop PSUs. They are of the same 19.5V, and the wattage of the laptop PSU is higher than that which the monitor is rated for. Visually, the socket on the monitor seems compatible, and the plug plugs...
    10-30-2025, 04:45 PM
  • Phil Stasik
    Pioneer PRO-FHD1 Elite Plasma Monitor Start-Up Problem
    by Phil Stasik
    Pioneer Pro-FHD1 Elite. Failure to power on.

    I'm new to this awesome forum, and have been reading like mad, but have not seen the answer to my challenge.

    We bought this Panasonic plasma monitor 16 years ago and it has never been serviced, so all parts are original, and the unit has never malfunctioned -- until about a month ago. The system fails to power on. At first (a month ago) this happened rarely. We learned to unplug for a few minutes to drain the caps, then re-plug, and the monitor would start normally. Now, we plug-in, turn on the main power switch, and the...
    01-19-2023, 01:22 AM
  • wattage
    AOC AG493UCX 49-inch monitor - Firmware request
    by wattage
    Hello Badcaps Community,

    I purchased a preowned AOC monitor that is not working and out of warranty. It was sold as not working. I am looking for guidance on self-repair. In particular, I am after the firmware for the monitor. At the end, I have included monitor model information and links to pics and vids of the issue.

    The problem is that it will not display a picture on any of its inputs. And the on-screen menu does not appear. The power button works properly. It powers on with the remote as well. But the on-screen menu does not appear, even when not connected to any...
    07-13-2025, 04:41 PM
  • ant3202
    HP 27es - LED monitor - Monitor Flashing On - Off
    by ant3202
    Hi Everyone

    Lately I am experiencing the deja-vu incident on one of the led monitor like this.
    https://www.badcaps.net/forum/troubl...lashing-on-off

    The monitor is HP 27es LED Monitor
    https://h30434.www3.hp.com/t5/Deskto...e/td-p/6804692

    The monitor will randomly blackout and display no signal and will recover again.
    Sometimes need to power and off again to restore the display but...
    03-20-2025, 07:30 PM
  • Loading...
  • No more items.
Working...