Plasma TCP65Vt repair tips

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ivtec
    Badcaps Legend
    • Dec 2008
    • 1967
    • USA

    #1

    Plasma TCP65Vt repair tips

    Hi guys;a friend of mine asked me if i knew what board could cause his tv,
    a Plasma Panasonic TCP65VT power turns on and off just clicks,
    i googled about this model and came up with nothing.
    Do you guys know what board should he get that could fix this fault,i told him that's a hit and miss?. Thanks
  • tw2005
    Badcaps Legend
    • Oct 2011
    • 6458
    • Australia

    #2
    Re: Plasma TCP65Vt repair tips

    Need better info than that, is the front LED blinking and if so how many?

    Will be a sequence of fast flashes then a pause and then repeats.

    Comment

    • ivtec
      Badcaps Legend
      • Dec 2008
      • 1967
      • USA

      #3
      Re: Plasma TCP65Vt repair tips

      Originally posted by tw2005
      Need better info than that, is the front LED blinking and if so how many?

      Will be a sequence of fast flashes then a pause and then repeats.
      I know, i'll ask when i see him thanks

      Comment

      • tw2005
        Badcaps Legend
        • Oct 2011
        • 6458
        • Australia

        #4
        Re: Plasma TCP65Vt repair tips

        Also full model number would be handy, VT25,30,50,60 ? That's 2010 - 2013/14 models

        Comment

        Related Topics

        Collapse

        • estabilito
          Tips geting oxidized when using wick
          by estabilito
          Hi, i have weird problem - when i'm using soldering wick to clean BGA balls under CPU or PCH on motherboard my tips(different types) getting oxidized very fast and lost all power.
          i Was trying different types of wick, flux - no difference. I can't even clean one full socket and i need to use deoxidizer in half-time.
          Temperature: 350-365celsius
          station: jbc cd-2bqe
          Wick: edsyn
          flux: warton hf rework jelly
          Do you have any tips?...
          04-12-2025, 11:55 AM
        • volleyrca
          A "Thank You", and some tips on repairing Panasonic Plasma TVs
          by volleyrca
          Hey all,

          I have a Panasonic TH-42PZ700U, which worked great for 10 years until a few months ago when it died with the, apparently common, 7 blinks failure. While I wish I had known about that problem, and the firmware upgrade that is supposed to prevent it from recurring, I'm happy to report that I was able to successfully repair my TV based on the information in the "Panasonic TH-42PZ77U SC board repair 7 blinks" thread on this forum, and in the "Master thread for Panasonic plasma not turning on" thread on AVSforums, in particular post 536.

          I didn't...
          07-10-2018, 05:10 AM
        • ArMaaN376
          Samsung PS51E550 Plasma TV
          by ArMaaN376
          Hello,
          I am having Samsung PS51E550 Plasma TV. While the TV was working, a crackling sound heard & video went off with audio still ON. After switching it off & ON, the red LED on TV blinks six times & then off.
          Opened TV cover & observed foll
          a) Green LED on the small PCB blinks at @5-6sec ON & off for 3-4 secs. Red LED on logic board ON
          b)Vs & Va on power supply board raises momentarily to 209v & 58v resp & then drops.
          c) Cold test on Y-main board shows all 3 pins of FGPF4536 IGBT short to Grnd.
          How to confirm Y -Buffer board...
          06-19-2024, 04:05 AM
        • jm1234
          Panasonic plasma TX-P42ST50 - 6 blinks
          by jm1234
          Hi,
          anyone able to provide the service manual for old plasma Panasonic TX-P42ST50E?
          It turns off almost immediately (0~5 seconds after pressing the on/off button) and starts flashing the red diode 6 times.
          I disconnected the left-hand side board (SC?, both the ribbon cable and the power cable to it) and also another ribbon going to bottom left board. Then the led signal is 8 flashes. According to service guide to another Panasonic plasma it would mean the left-hand side board is faulty. But I'm not sure it 100% applies to my model.
          I checked that board for any obvious faults...
          05-22-2024, 06:59 AM
        • KYBOSH
          Hitachi 55HDS69 55" Plasma TV - No Picture But Sound
          by KYBOSH
          Picked up a bahemoth plasma TV not too long ago and just now getting around to looking at it.
          No picture but you hear the TV static (white noise) playing loud and clear.
          The back was already taken off (and no screws were provided) as the previous owner had already taken a look.
          But it seems they didn't get too far and just left it.

          When I first took a look I was amazed at how pristine the inside looked.
          Its as if the TV had been in a time capsule.
          Caps looked like they were just pulled off the self.
          Copper coils had no sign of corrosion on...
          02-01-2023, 11:10 PM
        • Loading...
        • No more items.
        Working...