Hi everyone, I've got a LG pdp42x30201 to repair and need some help and advice.
When plugged in the green light comes on and then goes straight to red. I've had the back off and replaced several bad caps on the PSU and still the same.
My next step was to try unplugging the y sus board and z sus board and still get the same green light then red. I then moved onto the main board and with the connector on the top left of the board unplugged the PSU switches on briefly before shutting down.
Would this point to a short on the main board?
When plugged in the green light comes on and then goes straight to red. I've had the back off and replaced several bad caps on the PSU and still the same.
My next step was to try unplugging the y sus board and z sus board and still get the same green light then red. I then moved onto the main board and with the connector on the top left of the board unplugged the PSU switches on briefly before shutting down.
Would this point to a short on the main board?