Hitachi 42PD5000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Markus1
    Senior Member
    • Jul 2013
    • 80
    • Australia
    #1

    Hitachi 42PD5000

    Hi, first time here with the very first post. I value your expertise and therefore hoping for an advice on my Plasma TV problem.
    It suffered a short-circuit on the PSU (Murata 7409 L). It badly damaged one of the FAT's, designated on the PCB as Q201. I am now unable to read actual part number of that damaged FAT. The component is mounted on a heat sink, it is TO-220 package.
    The Service Manual (downloaded from Toms Service Manuals site) does not include Parts List and so far I can't find that info anywhere.
    I would much appreciate your advice on that matter.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Jaime Morillo
      Hitachi 32HAE2351 Vestel 17MB171 - Rotate Image
      by Jaime Morillo
      Hitachi 32HAE2351 Vestel 17MB171 - Rotate Image
      Mainboard: VESTEL 17MB171 Chassis: VES315WNGB - 2D - N52
      The TV was stuck on the logo and I couldn't access the update menu.
      I couldn't find the firmware for the Hitachi 32HAE2351 and updated it with the Toshiba 32WA2063DG - Vestel 17MB171 firmware.
      The image result was good, but the image is inverted.
      The image rotation/mirror function doesn't exist in the Menu Server. I can't correct the image.
      Do you have the firmware for the Hitachi 32HAE2351 - Vestel 17MB171 motherboard or a solution to rotate the image in...
      08-18-2025, 11:38 AM
    • XxMicroSoldering
      ASUS Rog Strix G17-712LV Laptop Liquid damaged
      by XxMicroSoldering
      Hello Guys

      I have a ASUS Rog strix laptop that I bought recently to fix and the previous owner spilled water on it . He brought it into a repair shop for them to check it out and instead of fixing it they damaged the battery connector of the laptop ! Other than that they damaged damaged nothing . But since the liquid damage the laptop only turns on and the keyboard lights up and then immediately turns off. I really want to repair this laptop and I also have experience in repairing phones etc and laptops and a bit of soldering but the diagnosing part is where I need help with and...
      3 Photos
      10-17-2024, 10:45 AM
    • Ady2017
      SMD fuse soldering advice please
      by Ady2017
      Hi all. I need to replace an SMD fuse on my camcorder and this is the first time I have had to do any SMD soldering so your advice would be appreciated. Below is a picture of the board that I am working on and I have highlighted the fuse that needs to be replaced. I managed to zoom in to take this picture but the fuse is really tiny and is sandwiched between other components so this is going to be a new milestone for me. I appreciate that I am going to have to buy a new soldering iron if you could advice on what I need please. I was thinking about putting a big soldering iron across the whole...
      1 Photo
      11-07-2025, 12:03 PM
    • wolf1976
      hitachi 50hk5600 problem with display
      by wolf1976
      hi
      i have the above tv and the display starts distorts the display at only in applications like you tube
      after and on the didital channels
      now without connect the antenna only the image of itsselfs tv i have the image i have in attach
      i have read in another forum someone else with similar problem with mine changes tcon card and motherboard and the problem remains
      can you tell me someone what is the reason that can causes that problem ? is the same the sisplay ?...
      09-13-2025, 02:26 PM
    • Tomylee
      Identification of Component T5 on NEXIQ USB-Link 2 (damaged due to crushing)
      by Tomylee
      Hi everyone,
      I'm currently repairing a NEXIQ USB-Link 2 that was physically damaged due to crushing. After a thorough inspection, it appears that only one component is visibly damaged: the T5 component, located right next to the Mini-USB port.

      It's a 4-pin SMD component, with one pin at each corner, aligned front-to-back along the USB port axis. Unfortunately, it is broken, and there are no visible markings left on the part to identify it.

      I'm looking for help with the following:

      The exact identification or part number of the T5 component
      ...
      05-28-2025, 12:42 PM
    • Loading...
    • No more items.
    Working...