XxMicroSoldering
Member
Last Activity: 10-19-2024, 10:53 AM
Joined: 10-05-2022
Location: Los Angeles, California
-
So what your basically saying is photograph all the parts that were affected by the water and then go replace all the parts wich are corroded with the same value parts ?... -
Yes but I really want to repair this laptop ! So where to start ?Leave a comment:
-
Thank you very much for your reply! Thing is I don’t know how to measure with a multimeter and especially with that of mine. Can you maybe explain to me a little bit on how to do this
thanks youLeave a comment:
-
Thanks for that ! I still don’t know how to diagnose this problem and fix it . Do you know how ? And what to start with ?Leave a comment:
-
Leave a comment:
-
ASUS Rog Strix G17-712LV Laptop Liquid damaged
Hello Guys
I have a ASUS Rog strix laptop that I bought recently to fix and the previous owner spilled water on it . He brought it into a repair shop for them to check it out and instead of fixing it they damaged the battery connector of the laptop ! Other than that they damaged damaged nothing . But since the liquid damage the laptop only turns on and the keyboard lights up and then immediately turns off. I really want to repair this laptop and I also have experience in repairing phones etc and laptops and a bit of soldering but the diagnosing part is where I need help with and... -
Re: MacBook Pro M1 2020 A2338 (NO BACKLIGHT HELP)
Hi sir I really need you're help regards...Leave a comment:
-
Re: MacBook Pro M1 2020 A2338 (NO BACKLIGHT HELP)
Here you go...Leave a comment:
-
Re: MacBook Pro M1 2020 A2338 (NO BACKLIGHT HELP)
Sorry for the late reply I will do it asap tommorowLeave a comment:
-
Re: MacBook Pro M1 2020 A2338 (NO BACKLIGHT HELP)
Hi what to do...Leave a comment:
-
Re: Lost Diode/Resistor RP802 MacBook Pro 2020 A2338 HELP
Hi do you know it?...Leave a comment:
-
Re: Lost Diode/Resistor RP802 MacBook Pro 2020 A2338 HELP
Hi yes I understand. But the problem is how should I place back the diode / resistors when there is much exposed copper how to start?? Whole explanation...Leave a comment:
-
Re: MacBook Pro M1 2020 A2338 (NO BACKLIGHT HELP)
I really don't know...Leave a comment:
-
Re: MacBook Pro M1 2020 A2338 (NO BACKLIGHT HELP)
So what do I do now. If there is a reading what should it be ??...Leave a comment:
-
Re: MacBook Pro M1 2020 A2338 (NO BACKLIGHT HELP)
Got it only thing is. I have a multimeter but mine doesn't make sound what now ??...Leave a comment:
-
Re: MacBook Pro M1 2020 A2338 (NO BACKLIGHT HELP)
Hi thank you very much for you're reply. No I don't have uv mask is that necessary to buy if so I will buy it. One thing when you apple uv mask and you want to scrape of. I don't know where the pads are for the diodes / resistors to place them back. Thing is I don't know where it is now because the copper parts is removed. So how do I know where to exactly place them back...Leave a comment:
-
Re: MacBook Pro M1 2020 A2338 (NO BACKLIGHT HELP)
So how do place back those on the exposed copper ?...Leave a comment:
-
Re: MacBook Pro M1 2020 A2338 (NO BACKLIGHT HELP)
Yes thanks . So RP801 is missing , RP802 AND CP800...Leave a comment:
-
Re: MacBook Pro M1 2020 A2338 (NO BACKLIGHT HELP)
Got it. But I have to place back diodes and resistor. How to do that if the copper parts is exposed is it even possible when the copper parts is exposed. I need to place back RP801 RP802 and a other. But the copper parts is removed. Is it possible then to place back?...Leave a comment:
-
Re: MacBook Pro M1 2020 A2338 (NO BACKLIGHT HELP)
Do you know how to fix the copper parts...Leave a comment:
No activity results to display
Leave a comment: