Samsung 50 plasma. Bad Z-sustain?? WITH picture

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sugar_ray
    Senior Member
    • Dec 2012
    • 121
    • Canada
    #1

    Samsung 50 plasma. Bad Z-sustain?? WITH picture

    Friend sent me this photo. fixed a few plasmas. Without looking at it. Seems to have the classic symptoms of a bad Z-sust. or buffer just going by the picture?? Just wanted everyone's thoughts??

    I had a Philips that had a bad Z-sust. But the entire screen was white pixely. the bottom and top of this screen appears to be OK if you look at this display being used as a monitor?? Hoping its not a bad panel??

    worth saving if I only require a sustain and or buiffer

    penny for your thoughts......
    Attached Files
    Last edited by sugar_ray; 07-02-2014, 10:26 PM.
    Tags: None
    • martino
      Not so "senior"
      • Aug 2013
      • 997
      • canada
      #2
      Re: Samsung 50 plasma. Bad Z-sustain?? WITH picture

      Are you sure that's a plasma? I've only seen LCD samsungs with that glass edge on the bezel (I could be completely wrong)
      Proud owner of dozens of broken TV's and many,many,many boards.


      Our website and passion:http://hollenhundshepherds.com/

        Comment

        • sugar_ray
          Senior Member
          • Dec 2012
          • 121
          • Canada
          #3
          Re: Samsung 50 plasma. Bad Z-sustain?? WITH picture

          Very possible!! He said plasma but is suppose to get me model #. Hope it's a LCD. Easier fix!! Ha ha

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK
              #4
              Re: Samsung 50 plasma. Bad Z-sustain?? WITH picture

              LCD: 100% bad panel if the lines are fixed.
              Plasma: 95% bad panel if the lines are fixed. 5% chance bad buffers but not aware of it being an issue on Samsung panels like these.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Document Archive
                  Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                  by Document Archive
                  This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                  09-07-2024, 05:50 AM
                • TR103
                  Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                  by TR103
                  Hi, I have a Samsung UE50TU with:
                  - sound and backlight, but no picture
                  - when it arrived, it had a picture for a few seconds
                  - it keeps rebooting
                  - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                  - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                  - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                  - without cable between mainboard and lcd panel and with a jumpered...
                  01-22-2025, 04:12 PM
                • JJAAMM
                  SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                  by JJAAMM
                  This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                  Problem
                  TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                  07-06-2023, 06:01 AM
                • Mgiffune
                  Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
                  by Mgiffune
                  I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

                  I ordered a supposedly ‘new' Tcon board this time, and                  ...
                  06-09-2024, 10:28 AM
                • Dodgethis
                  Samsung QN75Q6DRA, No Picture, Has BL, and Sound
                  by Dodgethis
                  Hello all,

                  This is my first post, but long term lurker on the form learning as much as possible about these TV's. I was given this TV as due to a power outage of constant On/off of power to TV. The TV originally would just click on and off (Typical Reboot Cycle). I opened the back of the TV, and troubleshooted by taking the 96 pin LVDS off one at a time to see if I had a picture on either side. I finally fixed the reboot cycle by finding the error on the left side of the screen off connector CN 1301, and the TV would stay on. Further troubleshooting led me to the driver boards where...
                  5 Photos
                  09-11-2024, 07:39 AM
                • Loading...
                • No more items.
                Working...