I have a Samsung PN51D440A5 plasma tv with no picture but still has sound. Initial troubleshooting found Vs on the power supply is getting dragged down to around 19 volts when it is connected to the y-sus, but raises to 208 volts when the y-sus connector is removed. This made me think the y-sus or x-sus is at fault. Also the light on the logic board is blinking slower than what I remember in the past from these units. With all other cables re-connected I found that the light on the logic board blinks faster if I disconnect the ribbon cable going from the logic board to the y-sus. My gut is telling me that I've got a bad y-sustain and/or y-driver. I do worry about a bad panel but I can say that it does not have any cracks or any visible defective areas. It was working fine one second and then no video the next. Anyone agree or disagree with my thought process? Thanks for the help.
-
Last edited by sluhbmet; 06-17-2014, 07:39 PM. -
Re: Samsung PN51D440A5 No Picture But Has Sound
On this set, does the X-main power connect to the Y-main board? If so, try unplugging the link between them and leave in the Y-main to power board connection.
A bad panel wouldn't cause a fault like this.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: Samsung PN51D440A5 No Picture But Has Sound
tom66,
Yes this model has the x-main power coming from the y-main board. I unplugged the x-main power connector and found no change. Vs is still dropping low (16-19 volts) when tv is powered up. Any other thoughts?Comment
-
Re: Samsung PN51D440A5 No Picture But Has Sound
I suspect you have shorted transistors on the Y-main. Remove the board and check all devices mounted on the heatsink.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
Hello everyone,
Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
Anyway I still fully expect that there has been something seriously damaged... -
Hi all
I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.
Symptom:
No picture no sound.
When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
No sound at all.
What I tried:
1. I tried unplugging the left or right ribbon... -
Hello all,
This is my first post, but long term lurker on the form learning as much as possible about these TV's. I was given this TV as due to a power outage of constant On/off of power to TV. The TV originally would just click on and off (Typical Reboot Cycle). I opened the back of the TV, and troubleshooted by taking the 96 pin LVDS off one at a time to see if I had a picture on either side. I finally fixed the reboot cycle by finding the error on the left side of the screen off connector CN 1301, and the TV would stay on. Further troubleshooting led me to the driver boards where...
Comment