Hisense H55B7300uk rsag7.820.8751/roh looking for R817 value.

Collapse
This topic has been answered.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • vikrep
    Member
    • Sep 2011
    • 32
    #1

    Hisense H55B7300uk rsag7.820.8751/roh looking for R817 value.

    Hi everyone,
    I'm looking value R817 on board rsag7.820.8751/roh. This resistor under heatsink. Or would be great looking on schematics.
    Thanks.
    Attached Files
    Tags: None
    • Answer selected by vikrep at 12-04-2024, 11:56 AM.
      lotas
      Badcaps Legend
      • Jan 2016
      • 4459
      • Russia
      R817 - 0.1 Om/2W
        • Selected Answer

        Comment

        • CapLeaker
          Leaking Member
          • Dec 2014
          • 7982
          • Canada
          #2
          Whatever the exact resistor is, it's going to be a low value.

            Comment

            • lotas
              Badcaps Legend
              • Jan 2016
              • 4459
              • Russia
              #3
              R817 - 0.1 Om/2W
                • Selected Answer

                Comment

                • vikrep
                  Member
                  • Sep 2011
                  • 32
                  #4
                  Originally posted by lotas
                  R817 - 0.1 Om/2W
                  Thank you!

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • jinu_j
                      Dell 2209WA - power supply - Fusible Resistor replacement
                      by jinu_j
                      Hi

                      I am trying to repair an ancient Dell 2209WA Monitor which suddenly shut off with a pop sound. On investigation found that one of the fusible resistors had blown. Further investigation identified multiple components as faulty because of which the fusible resistor blew. Please refer the attached circuit diagram showing the components that were found to be damaged.

                      1. FR950 - blown fusible resistor - 0.2 Ohm 1W
                      2. Q950 - shorted Q950 MOSFET - 650V 10A N Channel Mosfet
                      3. R835 - Blown Resistor - 20KOhm SMD resistor
                      4. D930 - Shorted Schottkey Diode...
                      05-03-2025, 10:51 PM
                    • mikey5791
                      Need help to replace burned resistor in 350w atx psu
                      by mikey5791
                      Hi to all forum members,

                      Got this faulty 350 watt atx psu dirt cheap from a local online seller as i am keen to use it as a learning tool to repair faulty power supply.
                      The faulty part is quite obvious from the burn area near the 16pin KA7500 BD pwm. The fuse is still intact with good continuity.

                      Upon power on ac, there is 5vdc standby power on cathode of diode D14 and about 10vdc on cathode of diode D13.(This should be the aux power to generate the 12v and 5v rail.)
                      Initially i replace the two burned resistors near my marked red arrow to 200 ohm resistor...
                      12-26-2024, 04:55 AM
                    • MidnightRoller
                      Can a resistor lose resistance after hot air?
                      by MidnightRoller
                      I am curious if a 0402 resistor could go from 43 ohm to 0. In electronics class and my experience a resistor can degrade and gain resistance all the way up to not being able to conduct at all. I have never heard of a resistor decreasing in resistance and becoming 0 ohm or a dead short… that's not the direction they fail… or so I thought.

                      I was attempting to remove a wson8 chip on an iMac motherboard and it required a lot of heat, on one side of the chip were 3 0402 resistors that were very close. I popped the chip out unintentionally out of the tweezers and sent those resistors...
                      02-02-2022, 11:46 PM
                    • artvandalai
                      What resistor ohm will work better to repair this waterpik?
                      by artvandalai
                      The resistor on this waterpik blew. I changed it with the a similar spec 47ohm 2 watt yageo resistor but it still keeps blowing the resistor. Checking with the multimeter the motor, capacitor, diodes, and thermal fuse all checked normal. Will a higher ohm resistor work better? What ohm resistor will work better to repair this waterpik? This video is showing the repair with a 56 ohm resistor https://www.youtube.com/watch?v=_J7_rV7ui1Y
                      3 Photos
                      01-05-2025, 04:10 PM
                    • chth96
                      Is it okay to replace 1/2 watt resistor with 1 watt resistor in AC/DC adapter?
                      by chth96
                      I have purchased an 100-240v AC/5v 2a DC adaptor from aliexpress,and a month ago It smelled burning when I plugin it powerstrip.
                      Since then, This AC/DC adaptor have been out of order.
                      But A few days ago,I replace 0.5 watt resistor with 1 watt resistor(1ohm) in this adapter.
                      After replacing resistor,It succeed to recharge all of android phone.And When I measure voltage on the two pins of USB port,It shows 5.5v
                      Is it okay to replace 1/2 watt resistor with 1 watt resistor in AC/DC adapter?
                      And Is there any possibility that it will suddenly explode as well as to be out...
                      12-03-2023, 04:40 AM
                    • Loading...
                    • No more items.
                    Working...